- ページ 9

ヒーター Clarke 6925340のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke 6925340 13 ページ。 400v electric fan heater

ページを印刷する

TROUBLE SHOOTING

Problem

Heater does not

operate,

although

plugged in with

the switch and

thermostat

switched on.

Heating element

glowing hot.

The unit has failed

to heat up so only

the air fan has

operated.

Abnormal noise.

MAINTENANCE

WARNING: ALWAYS DISCONNECT FROM THE POWER SUPPLY AND ALLOW

THE HEATER IT TO COOL DOWN BEFORE PERFORMING ANY

MAINTENANCE TASKS.

Clean the heater with a soft damp cloth. Do not use solvents or abrasives.

Make sure that the heater grill is not blocked.

No other maintenance is required, should you discover any problem with the

heater, return it to the CLARKE service department for repair.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

Possible Cause

Plug is loose/bad

connection.

Fuse blown or

circuit breaker

trips.

No power at

socket outlet

Input voltage too

high.

Air inlet grille is

blocked.

Control switch not

set at a "HEATING"

level.

Thermostat has

tripped.

Heater is not level. Stand heater on a level surface.

Remedy

Pull the plug out & check all

connections (cable/plug and socket).

Replace if necessary and investigate

cause. If fuse blows repeatedly, consult

your CLARKE dealer.

Insert the plug in a suitable socket.

Use a power supply in accordance

with the rating on the label.

Ensure the heater is kept away from

any objects which could cover the air

inlet or be drawn into it.

Turn switch to a heating level.

Turn the thermostat and listen. If there is

no CLICK and the thermostat is not

damaged, the heater will

automatically switch ON when it has

cooled down.