- ページ 4

ヒーター Clarke Devil 371PのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke Devil 371P 13 ページ。 Devil quartz infra-red halogen heaters

4. ALWAYS disconnect from the mains supply before moving the heater, or

performing any cleaning or maintenance tasks.

5. Inspect the mains cable regularly for signs of damage. DO NOT use if it is

damaged, and ALWAYS keep it away from the source of heat.

6. Check the heater for damage before use. DO NOT use if the heater tubes

are damaged or broken. Any damage should be properly repaired or the

part replaced. If in doubt, DO NOT use. Consult your local Clarke dealer.

SERVICE & REPAIRS

1. If necessary, have your heater repaired by a qualified person using

identical replacement parts. This will ensure that the safety of the

appliance is maintained.

Additionally, please keep these instructions in a safe place for future

reference.

DEVIL 370P & 370SP HEATER UNITS

The 370 models are provided with a 13 amp BS 1363 plug, fitted with a 13amp fuse

and MUST be connected to a standard, 230 Volt (50Hz) electrical supply, preferably

through a suitably fused isolator switch.

WARNING: THIS APPLIANCE MUST BE EARTHED

IMPORTANT: The wires in the mains lead should be wired up in accordance

with the following colour code:

As the colours of the flexible cable of this appliance may not correspond with

the coloured markings identifying terminals in your plug, proceed as follows:

• Connect the GREEN & YELLOW coloured cord to the plug terminal

marked with a letter E or Earth symbol "

GREEN & YELLOW.

• Connect the BROWN coloured cord to the plug terminal marked a

letter "L" or coloured RED.

• Connect the BLUE coloured cord to the plug terminal marked a

letter "N" or coloured BLACK.

Green & Yellow - Earth

Blue

Neutral

Brown

Live

" or coloured GREEN or