- ページ 7

ヒーター Clarke Devil 6009のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke Devil 6009 20 ページ。 Electric fan heaters
Clarke Devil 6009 にも：取扱説明書 (20 ページ)

Plug must be BS1363/A approved

Earth

(Green and Yellow)

Neutral

(Blue)

Ensure that the outer sheath of the cable is firmly held by the clamp

We strongly recommend that this machine is connected to the mains supply

via a Residual Current Device (RCD).

If in doubt, consult a qualified electrician. DO NOT attempt repairs yourself.

DEVIL 6005 (5KW), DEVIL 6009(9KW) AND DEVIL 6015(15KW) UNITS

These machines MUST be connected to a 400 Volt, 3 PHASE 50Hz supply

through a suitably fused isolator switch. They cannot be operated from a single

phase supply.

The user should purchase a suitable connecting lead as shown in the diagram,

which is compatible with the appliance socket. The unit requires 5 pins

including a master earth pin, and is suitable for AC 380/415v, 50/60Hz with a

capacity of 16A/6h (Devil 6005 and 6009) or 32A/6h (Devil 6015) and rated at

IP44 class (or better) insulation. A length of 2-3 metres is recommended as

giving mobility to the appliance but without becoming a trip hazard.

The plug incorporates a hood which will secure the cable in position when

engaged with the appliance.

If in any doubt, consult a qualified electrician. DO NOT attempt any electrical

repairs yourself.

Always fit a 13 Amp fuse.

Live

(Brown)