- ページ 7

ヒーター Clarke DEVIL 7005のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke DEVIL 7005 17 ページ。 5kw electric fan heater
Clarke DEVIL 7005 にも：取扱説明書 (17 ページ)

ELECTRICAL CONNECTIONS

WARNING: THE INSTALLATION OF THIS APPLIANCE SHOULD BE CARRIED

OUT BY A COMPETENT ELECTRICIAN AND BE IN ACCORDANCE WITH THE

CURRENT IEE WIRING REGULATIONS (BS7671-2:2008).

This machine MUST be connected to a 400 Volt, 3 phase 50Hz supply through a

suitably rated isolator switch. It cannot be operated from a single phase

supply.

The user should purchase a suitable connecting cable capable of handling 63

Amps (recommended Cross Sectional Area 10mm

63A (or better) which complies with BSEN 60309. A length of 2-3 metres is

recommended giving mobility to the appliance but without becoming a trip

hazard

If in any doubt, consult a qualified electrician. DO NOT attempt any electrical

work yourself.

The Devil 7030 has a thermal cut out to prevent the unit from overheating.

If the temperature of the front grille gets too high the thermal cutout will turn

off the heating elements. When the fan has cooled the unit sufficiently, normal

operation will resume.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

) and supply plug rated at