- ページ 2

ツール Clarke 1801877のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Clarke 1801877 4 ページ。 Lazy tongs rivet gun

INTRODUCTION

Thank you for purchasing this CLARKE Rivet Gun. Before attempting to use this

product, please read this manual thoroughly and follow the instructions

carefully. In doing so you will ensure the safety of yourself and that of others

around you and you can look forward to your purchase giving you long and

satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission. This guarantee does not effect your

statutory rights.

FITTING AND STORING THE NOZZLES

The CHT877 rivet gun is equipped with a choice of 5 different size nozzles to suit

different rivets. Choose the rivet to be used for the job.

The sizes available are:

• 3/32" (2.4 mm)

• 1/8" (3.2 mm)

• 5/32" (4.0 mm)

• 3/16" (4.8 mm)

• 1/4" (6.4 mm)

NOTE: The dimensions are

engraved on each one.

1. Screw your chosen nozzle into the tip of the rivet gun, finger tight.

2. Always store the unused nozzles by screwing them back into the rivet gun

for safe keeping.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]