- ページ 3

ツール Clarke 3110730のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke 3110730 17 ページ。 3” cut-off tool

SAFETY PRECAUTIONS

1. Keep the work area clean and tidy.

2. Dress appropriately - do not wear loose clothing or jewellery. Tie long hair

out of the way.

3. Keep children and visitors away - do not let children handle the tool.

Make sure that any other persons in the work area are suitably dressed

and are wearing eye and ear protection.

4. Keep the work area well lit.

5. Although the cut off tool may be used outdoors, do not leave it exposed

to the elements. Avoid direct sunlight, direct heat, rain/moisture etc.

6. Keep the air supply hose away from sources of heat, oil and sharp edges.

7. Do not fit the tool to a stand or clamping device that may damage it.

1. Always stay alert and use common sense - do not use this product when

you are tired or under the influence of alcohol or medication.

2. Always wear eye protection when using the cut-off tool to provide

protection from flying particles from the front and the side.

3. Always wear ear protectors when using the cut-off tool .

4. Do not over-reach. Keep proper footing and balance at all times.

5. Never use any type of bottled gas as a source of power for the tool.

6. Do not connect the air supply hose with your finger on the trigger

7. Do not exceed the maximum pressure for the tool: (90 psi / 6 bar).

8. Check air hoses for leaks or worn condition before use and ensure that all

connections are secure.

9. Do not use the tool for any purpose other than that described in these

instructions.

10. Never carry out any alterations or modifications to this product.

11. Always disconnect from the air supply when:

Performing any maintenance

The tool is not in use

The tool will be left unattended

Moving to another work area

12. Never force or misuse the tool. It will do a better and safer job at the rate

for which it was designed.

Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]