- ページ 4

ツール Clarke 3120178のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke 3120178 17 ページ。 Needle scaler/chisel kit

• The tool will be left unattended.

10. Never use the tool if it is defective or operating abnormally.

11. This air tool should be serviced at regular intervals by qualified service

personnel.

12. Avoid damaging the air tool by applying excessive force of any kind.

13. Always maintain the air tool with care. Keep it clean for the best and safest

performance.

14. Do not force or misuse the air tool. It will do a better and safer job at the

rate for which it was designed.

15. Quick change couplings should not be located at the tool. They add

weight and could fail due to vibration.

16. Do not remove any labels. Damaged labels should be replaced.

17. This tool vibrates with use. Vibration may be harmful to your hands or arms.

Stop using the tool if discomfort, a tingling feeling or pain occurs. Seek

medical advice before resuming use.

AIR HAMMER SPECIFIC HAZARDS

1. Only use accessories designed for use with this power tool.

2. Never use any of the chisels supplied as hand struck tool.

3. Never use blunt chisels which require excessive pressure and can break

from fatigue.

4. Never abuse the tool by prising which can result in a broken tool.

5. Ensure there are no hidden electrical cables, gas pipes etc, which could

cause a hazard if damaged by action of the chisels.

TRANSPORTATION

1. Never carry the tool by the air hose or with your finger on the trigger.

2. Always disconnect from the air supply when changing bits or when the tool

is not required for immediate use in order to avoid accidental starting.

3. Wherever possible use both hands to control the tool.

4. Always ensure the tool has stopped before putting it down after use

5. When not in use the tool should be disconnected from the air supply and

stored in a dry place out of the reach of children.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]