- ページ 4

ツール Clarke 6500411のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke 6500411 13 ページ。 12” disc sander

15. Maintain tools with care - Keep cutting tools sharp and clean for better and

safer performance. Follow instruction for lubricating and changing

accessories. Inspect tool cords periodically and if damaged have them

repaired by an authorized service facility. Inspect extension cords

periodically and replace if damaged. Keep handles dry, clean and free

from oil and grease.

16. Remove adjusting keys and wrenches - Form the habit of checking to see

that keys and adjusting wrenches are removed from the tool before

turning it on.

17. Avoid unintentional starting - Ensure switch is in "off' position when plugging

in.

18. Use outdoor extension leads - When the tool is used outdoors, use only

extension cords intended for outdoor use and so marked.

19. Stay alert - Watch what you are doing, use common sense and do not

operate the tool when you are tired.

20. Check damaged parts

• Before further use of tool, it should be carefully checked to

determine that it will operate properly and perform its intended

function.

• Check for alignment of moving parts, binding of moving parts,

breakage of parts, mounting and any other conditions that may

affect its operation.

• A guard or other part that is damaged should be properly repaired

or replaced by an authorized service centre unless otherwise

indicated in this instruction manual.

• Have defective switches replaced by an authorized service centre.

• Do not use the tool if the switch does not turn it on and off.

WARNING: THE USE OF ANY ACCESSORY OR ATTACHMENT OTHER THAN

ONE RECOMMENDED IN THIS INSTRUCTION MANUAL MAY PRESENT A RISK

OF PERSONAL INJURY.

21. Have your tool repaired by a qualified person - This electric tool complies

with the relevant safety rules. Repairs should only be carried out by

qualified persons using original spare parts, otherwise this may result in

considerable danger to the user.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]