- ページ 2

ツール Clarke CHT878のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Clarke CHT878 4 ページ。 Hand riveter with stem collection tank

INTRODUCTION

Thank you for purchasing this CLARKE Hand Riveter with stem collection tank.

Before attempting to use this product, please read this manual thoroughly and

follow the instructions carefully. In doing so you will ensure the safety of yourself

and that of others around you and you can look forward to your purchase

giving you long and satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission. This guarantee does not effect your

statutory rights.

FITTING AND STORING THE NOZZLES

Choose the rivet to be used for the job. The CHT878 Hand Riveter is equipped

with a choice of 5 different size nozzles to suit different rivets.

The sizes available are:

• 3/32" (2.4 mm)

• 1/8" (3.2 mm)

• 5/32" (4.0 mm)

• 3/16" (4.8 mm)

• 1/4" (6.4 mm)

NOTE: The dimensions are

engraved on each one.

• Always store the unused nozzles by screwing them back into the stem

collector of the riveter for safe keeping.

Screw your chosen nozzle into the tip of the rivet gun, finger tight.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]