- ページ 3

ツール Clarke CONTRACTOR 6462121のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke CONTRACTOR 6462121 10 ページ。 Hinge jig

Thank you for purchasing this CLARKE Hinge Jig Set

Before attempting to use the jig, please read this manual thoroughly and follow the

instructions carefully. In doing so you will ensure the safety of yourself and that of others

around you, and you can look forward to the jig set giving you long and satisfactory

service.

This CLARKE product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt as proof of purchase.

This guarantee is invalid if the product is found to have been abused or tampered

with in any way, or not used for the purpose for which it was intended.

Faulty goods should be returned to their place of purchase, no product can be

returned to us without prior permission.

This guarantee does not effect your statutory rights.

Introduction

An easy to use and carry high quality hinge jig for precision fitting of 3" and 4" hinges.

Assembly and setting time is minimal, can be quickly dismantled for storage.

Specifications

Hinge Length .......................................... 3" & 4"

Hinge Width ............................................ Min. 3/8" (9mm) Max. 1 1/2" (38mm)

Door Height ............................................ Min. 6'5" (1955mm) Max. 6'8" (2032mm)

Contents

3 X 3" hinge jig plates : T3 (top plate 'A'), M3

(middle plate 'B') & B3 (bottom plate 'C').

3 X 4" hinge jig plates: T4 (top plate 'G'), M4

(middle plate 'H') & B4 (bottom plate 'I').

3 aligning/clamping sets (D).

2 adjustable connecting bars (F).

4 wing screws (E).

1 instruction Manual.

Other equipment required (not supplied).

Light duty plunge router capable of taking a

16mm guide bush.

12.7mm (½") router bit.

Minimum of 3 'G' clamps or similar.

Folding workbench.

CLARKE GUARANTEE

-2-