- ページ 4

ツール Clarke CRT 40のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Clarke CRT 40 6 ページ。 40-piece rotary tool kit
Clarke CRT 40 にも：ユーザーマニュアル (13 ページ)

ページを印刷する

ELECTRICAL CONNECTIONS

This product is provided with a standard 13 amp, 230 volt (50Hz), BS 1363 plug, for

connection to a standard, domestic electrical supply. Should the plug need changing at

any time, ensure that a plug of identical specification is used.

WARNING

This appliance is Double Insulated, and the two wires in the mains lead should

be wired in accordance with the following colour code:

BLUE

BROWN

•

Connect the BLUE coloured cord to the plug terminal marked with the letter "N"

•

Connect the BROWN coloured cord to the plug terminal marked with the letter "L"

If this appliance is fitted with a plug which is moulded on to the electric cable (i.e. non-

rewireable) please note:

1. The plug must be thrown away if it is cut from the

electric cable. There is a danger of electric shock

if it is subsequently inserted into a socket outlet.

2. Never use the plug without the fuse cover fitted.

3. Should you wish to replace a detachable fuse

carrier, ensure that the correct replacement is

used (as indicated by marking or colour code).

4. Replacement fuse covers can be obtained from

your local Clarke dealer or most electrical stockists.

FUSE RATING

The fuse in the plug must be replaced with one of the same rating (5 amps) and this

replacement must be ASTA approved to BS1362.

If in doubt, consult a qualified electrician. Do not attempt any electrical repairs yourself.

CABLE EXTENSION.

Always use an approved cable extension suitable for the power rating of this tool (see

specifications), the conductor size should also be at least the same size as that on the

machine, or larger. When using a cable reel, always unwind the cable completely.

NEUTRAL

LIVE

VARIABLE SPEED CHART

Speed Indicator

Position

MAINTENANCE

ALWAYS unplug the tool from the mains supply and ensure it is swtched OFF when

performing maintenance tasks.

The tool should be kept clean at all times, Ensure the ventilation ducts are clear,

and the power cable is in good condition. Get into the habit of cleaning thoroughly

after each use and before storing.

Never clean with solvents, use a moist cloth with soapy water if necessary.

The tool does not require lubrication.

ACCESSORIES

A 100 piece Accessory Kit is available from your Clarke dealer.

Please quote Part Number 6468025

RPM

17,500

18,500

24,500

27,800

31,000

33,500