- ページ 12

ツール Clarke KIT1100のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke KIT1100 17 ページ。 Air tool kit

4. TYRE INFLATOR

This lightweight pistol grip tyre inflator

complete with air pressure gauge is

suitable for inflating tyres on motor

vehicles, cycles and trailers etc.

1. Attach the hose to the tyre inflator

and fully tighten.

2. Remove the dust cap from the

tyre valve and check that the tyre

valve is clean before connecting.

3. Depress the lever on the end of

the connector and push the connector fully home onto the tyre valve.

Release the lever to hold the connector in position. (If the valve leaks, the

connector may need repositioning). Correct position is confirmed by a

steady reading on the gauge.

4. Check the tyre pressure on the gauge.

5. Pull the trigger to inflate the tyre, or press the button on the side of the pistol

grip to deflate. Re-check the tyre pressure.

When the tyre pressure is correct, carefully disconnect and remove the

connector. Replace the dust cap on the tyre valve.

5. AIR HOSE

The recoil hose included in this kit is

fitted with connectors for use with the

other items.

AIRLINE ACCESSORIES AND EQUIPMENT

An extensive range of airline equipment is available from your Clarke dealer

including hoses, retractable hose reels, filter/regulators, in-line regulators,

pressure gauges, spray gun cleaning kit, respiratory masks and safety goggles.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]