- ページ 4
ツール Clarke PKP411のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke PKP411 8 ページ。 Heating torch set
ページを印刷する
In the case of the PC109 kit, the flame can also be adjusted by positioning
the clip-on sleeve provided, over the air holes in the circumferance of the
17mm screw-tipped nozzle.
Models PC216,
PKP411 and
PLK1074 have
a support arm
which can be
clamped to
the nozzle
extension to
steady the unit
at rest. This
should be
fitted to ensure the flame points upwards, away from any supporting surface.
MAINTENANCE
The torches are maintenance free, except for visual checks before use to
ensure all connections are secure, and the gas hose is in perfect condition. If
the nozzle becomes sooted, clean with a soft wire brush. DO NOT poke wire
etc, through the holes in the nozzle.
To remove the filter from the nozzle for cleaning, grasp the nozzle with a pair
of mole grips or very carefully secure in a vice, then unscrew the filter.
The parts on the following pages are all available from your CLARKE dealer.
COMPONENT PARTS
PLK 1074
Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]
4