- ページ 3

DVR DirecTV GenieのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DirecTV Genie 7 ページ。
DirecTV Genie にも：ユーザーマニュアル (2 ページ)

ページを印刷する

Step 2:

Connecting a Genie® Receiver to an HDTV

Option 1: Using an HDMI Cable

Genies are considered the primary

receiver and should be connected

This option supports HD video and Dolby® Digital audio.

to your main (primary) television.

Genies must be connected ﬁ rst and

can operate without connecting

Locate the HDMI port on the back of the Genie®.

Genie® Minis. Genie® Minis must

have a primary Genie® connected to

work properly. Choose one of the

Plug one end of the cable into the HDMI

following two options to plug your

port on the back of your receiver.

Genie® into your television:

Do not plug the power cord into an outlet

until you've completed the other steps.

Ensure that one end of the coax

cable is securely connected to

Plug the other end

the Genie® and the other end is

of the cable into the

securely connected to the coax

HDMI port on the

wall jack. Your coax cable may be

back of your TV.

built into your wall. If that's the

case, just ensure that the coax

cable is securely connected to the

Genie®. Connect the AC power

Connect your Genie® to power by plugging the power

cable to the Genie®.

cord into the Genie® then into your wall outlet.

Option 2: Using RCA (Component) Cables

This option supports HD video and audio. You will need two separate RCA cables.

Locate the RCA (Component) ports on the back of the Genie®.

Do not plug the power cord into an outlet

until you've completed the other steps.

Plug the green, blue and red ends of cable

1 into the corresponding green, blue and

red output ports on the back of the Genie®.

Plug the other ends of the cable into the

corresponding input ports on the back of

your TV.

For audio, plug the red and white ends of

cable 2 into the corresponding red and white

output ports on the back of your receiver.

Plug the other ends of the cable into the

corresponding input ports on the back of

your TV.

DO NOT use the yellow end of the cable.

Set your TV resolution to 1080i or 720p.

Note: If you don't see a clear picture, your TV might not be set on the right input (for example,

component 1). You can change your TV input using your TV remote control or manually by pressing

the Input, Source, TV/Video or A/V button on your TV's control panel.

VIDEO

Red, green, blue

and possibly

yellow

AUDIO

Red, white

Connect your Genie® to power by plugging the power cord

into the Genie® then into your wall outlet. Power the Genie®

and TV.