- ページ 5

扇風機 Claro CFCLSU2WHABSのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Claro CFCLSU2WHABS 15 ページ。

INSTALLATION AND ASSEMBLY

CAUTION: Before installing the fan make sure you have turned OFF the electricity supply.

1. Choose a location for mounting the fan where the blades will have at least 2.1 metres of clearance

from the floor.

2. Make sure that the installation site will not allow the rotating fan blades to come into contact with

any object and that there is enough space from the blade tip to the wall or ceiling. Please note that

insufficient clearance distances might cause wobbling and the bigger this clearance is the better the

airflow from your fan will be.

3. DO NOT install CFCLSU2WH and CFCLSU2LWH outdoors. Installing the fan in a position where it

could be exposed to water, moisture or external elements is dangerous.

4. CFCLSU2WHABS and CFCLSU2LWHABS can be installed in a position where it is covered or

enclosed al fresco areas and there is a minimum clearance of 1.50 m from the blade tip to all edges

of the roof or positions where could be exposed to water, moisture or other dangerous external

elements.

5. Secure the hanging bracket to the ceiling joist or suitable structure that is capable of carrying a

load of at least 45Kg, with the two long fixing screws provided. Ensure that at least 30mm of the

screw is threaded into the support.

The fixing screws included are designed for use when ceiling fan is secured onto timber joists. For all

other surfaces, additional and suitable fixing screws for that surface will need to be purchased.

Ensure the power is off when installing this fan.