- ページ 4

リモコン DirecTV RC65RXのPDF ハウ・トゥ・ドゥをオンラインで閲覧またはダウンロードできます。DirecTV RC65RX 7 ページ。 Use one remote to control four receivers

Here you have the option to change the receiver number. You can choose from 1 to

8. With the receiver number highlighted, press the {SELECT} button and use the

arrows to select the one you want and press {SELECT} again.

You should leave one receiver set up as Receiver 1, and if you have a second, use

Receiver 2. For a third, use Receiver 3, and so forth.

When you are done use the right arrow button to highlight "Continue" and press

{SELECT}.

SolidSignal.com

Step 1, continued

Reproduction is permitted provided copyright information is intact.

You will get a "nag" screen

like this one to make sure

you know what you're

doing. If you don't do this

process correctly, you may

lose the use of the remote

control and at that point

you'll need the front panel

buttons to help you. Press

the {-} (Dash) button on

the remote to continue.