- ページ 16
ステレオ・イコライザー AfterMaster Audio Labs Aftermaster TVのPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。AfterMaster Audio Labs Aftermaster TV 20 ページ。 Audio remastering device
ページを印刷するThe Aftermaster TV Device is connected to my TV and Source Device
correctly but there is no sound?
> Please go to the settings menu on your television to ensure that your
speaker setting has "TV Speakers" selected for sound output.
> Press the Aftermaster TV power button 2 or 3 times until the
number 1 and number 4 lights are on.
> Insure that your cable box or other source is configured for STEREO
and that SURROUND is disabled
This menu is usually found in the "SETUP/AUDIO" menu on the device.
The Aftermaster TV device is connected to my TV and my Source
Device correctly but there is no dialogue track?
> Please check the audio settings on the HDMI source device to ensure
any other audio enhancements.
> Turn your Aftermaster TV off and then on and make sure that
number 1 and number 4 lights are on..
The Aftermaster TV Device is connected to my TV and Source Device
Correctly but there is no Video or Audio.
> Allow 1-2 minutes for Aftermaster TV to initialize each time it is
plugged in.
> Unplug the power and any HDMI cables connected to your
Aftermaster TV and then reconnect them after 15 seconds.
> Please contact us at [email protected] or at 1-866-478-3120
for further assistance.
For further assistance for issues not listed on this page, please contact
us at [email protected] or 1-866-478-3120.
Troubleshooting
16