- ページ 7
タッチスクリーン Ctouch CLAP-75UHDA5のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Ctouch CLAP-75UHDA5 16 ページ。 Laser air+ series
ページを印刷する
The power to engage
IDENTIFICATION OF CONTROLS
13
nr.
Description
1
USB(2.0)(for camera)
This port is connected to PC (internal OPS), but is changed to Android if current source is
AV, USB or in home page.
Notes:
1. Please open the dust cover before being used.
2. It can perfectly support camera's up to 720p.
2
Internal PC module slot
Insert the CTOUCH Easy air PC module (Optional)
3
Power LED
Red: In standby mode.
White: In power on mode.
Remote control sensor
Aim the remote control towards this spot on the CTOUCH interactive display.
Power
Press to turn on or off the CTOUCH interactive display.
Note: When the CTOUCH interactive display is turned on, press the button in middle to
show the navigation bar. Press the button for about 2 seconds and the screen will go into
stand-by mode.
4
USB port for the CTOUCH interactive display Andriod-surrounding.
5
USB port for Easy air PC module.
Note: If there is no Easy air PC module inserted, the USB port has no function.
6
AC IN
Plug the AC cord into this jack and into a power outlet.
(AC 100-240V 50/60Hz)
7
Fuse
12A 250V
8
Power Switch
Press ( I ) to connect the power, press (O) to cut off the power.
Note: Don't cover the power switch.
Laser Air Plus | User Manual
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
nr.
Description
1
VGA OUT
Output of the currently selected PC IN 1/2/3 signal.
2
PC IN1/2/3
Connect the video/audio of a computer to these ports.
3
USB2.0/3.0
Connect USB devices to these ports.
4
HDMI1/2 INPUT
Connect an HDMI or DVI device to this HDMI socket.
HDMI1(MHL): Connect a MHL- enabled device such as a smart phone to this jack to view
the external device's screen on your screen.
HDMI2(ARC): Connect an ARC-enabled home theater receiver to this jack.
5
DP(DisplayPort) INPUT
Connect an external device to DP socket.
6
Antenna
WiFi antenna.
7
TOUCH OUT1/2
Output for external devices connected to PCx or HDMIx ports, which support touch
systems.
Note: TOUCH OUT 2 takes precedence over TOUCH OUT 1 in default. You can define it in
the Lock menu.
8
RS232
For remote control of the CTOUCH interactive display.
9
WAN IN
The built-in router input port. Connects the external network.
10
LAN OUT
The built-in router output port. Connects to another computer or other internet enabled
devices.
11
AV IN
Input port for composite video.
12
S/PDIF digital audio output
Connect a digital sound system to this S/PDIF socket..
13
Connect headphones to this jack. The current selected source is audible.
NOTE:
If the VGA or HDMI does not get any signal it will go into stand-by after two minutes. If there is no input on the AV it will go into stand-by mode after 10 minutes.
IDENTIFICATION OF CONTROLS
Laser Air Plus | User Manual
14