- ページ 6

掃除機 clarsen K044のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。clarsen K044 10 ページ。 Lightweight carpet cleaner

Lightweight Carpet Cleaner

Please read and retain these instructions for future reference

Carpet Cleaner Use

1. Plug cord into electrical socket. Turn on the machine by

using the on/off switch located on the side of the

machine.

IMPORTANT: Never leave unit unattended with power on.

Turn off when emptying and filling tanks. Do not over-

saturate the carpet.

Step on the handle release pedal to lower the machine

into the cleaning position While pressing the trigger,

pull carpet washer in a backward motion. Release the

trigger and push the unit forward in the same path to

agitate and remove dirty water and solution from the

carpet. (For heavily soiled areas, repeat if necessary).

IMPORTANT:

•

For best cleaning results use a steady, moderate, forward and backward motion. Always work from back

to front across the room to avoid stepping on wet carpet and lowering the pile.

•

Do not make the carpet too wet! Use no more than two sets of forward and backward strokes while

releasing solution. Always follow with dry strokes; the more the better

•

Allow carpet to dry. Avoid walking on the carpet until it is dry. Increased air circulation (open doors,

turn on fans, etc.) or use of a dehumidifier will help carpet dry thoroughly and prevent the growth of

mould or mildew.

•

Vacuum the carpet thoroughly before washing the carpet and after it has dried.

Emptying the Recovery Tank

An automatic shut-off device prevents the extractor from picking up more dirty water than it can hold in

the recovery tank. You will know the tank needs to be emptied:

•

When the motor sound rises in pitch.

•

You do not see dirty solution coming up through the recovery tank lid.

•

The float inside the recovery tank has risen to the top of the tank and is visible through the transparent

tank.

1.Unplug the appliance from the electrical outlet.

2.Unlock the Recovery tank by lifting the dirty water tank

latch and remove from the base unit using the handle

Instructions for Use

K044

v001: 21/07/21