- ページ 6

ジャックス CLAS OH 6035のPDF マニュアルをオンラインで閲覧またはダウンロードできます。CLAS OH 6035 9 ページ。 Service garage jack
CLAS OH 6035 にも：マニュアル (12 ページ)

OH 6035

CHARACTERISTICS

Capacity: 3T

Min Height.: 95mm

Max. Height: 515mm

Weight: 39.5kg

Dimensions : L. 772 x W.367 x H. 1225mm

ASSEMBLY

1. Assemble the 2-piece with bolt and fixed T shape handlewith screw supplied.

2. Insert handle into the handle socket. Tighten the bolt on handle socket to prevent accidental

removal of handle while in use.

USING INSTRUCTIONS

Lifting

1. Prior to operating the jack, remove any accumulated air from the system below:

• Pull the handle and turn it counterclockwise whilst held in this position

• Pump the jack several times to ensure internal lubrication and bleed the accumulated air from

the system.

2. Refer to the vehicle manufacturer owner's manual to locate approved lifting points on the

vehicle. Center jack saddle under lift point.

3. This jack are fitted with a foot pedal that gives a faster approach to the load.

4. Pump handle full stroke until load reaches desired height.

5. Transfer the load to appropriately rated jack stands.

SERVICE GARAGE JACK 3T 95mm