- ページ 9

リフティングシステム CLAS OH 0238のPDF マニュアルをオンラインで閲覧またはダウンロードできます。CLAS OH 0238 12 ページ。 Load balancer 680kg

OH 0238

LOAD BALANCER 680kg

SPECIFICITES

Maximum load: 680kg

Beam lenght: 40cm

Chains : 4 chains 25cm long (Including shackle)

INSTRUCTIONS

Unpacking

When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call

your reseller.

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text

under subheadings therein before set up or use of this product.

To prevent serious injury from tool failure:

Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further

use. Always ensure heavy loads are securely supported before lifting or moving.

Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram

near the end of this manual.

Functions

The Load Leveler is designed for use with a shop crane or hoist, to suspend an engine (or other heavy item up

to 1500 pounds) and adjust the angle of the piece to

make it level.

Assembling

The Handle (21) needs to be repositioned on the Load

Leveler before use.

To do this:

a. Remove the Bolt (19), Nut (20) and Handle from the

Crank (9).

b. Place the Handle outside of the

Crank and replace the Bolt and Nut.