- ページ 8

ヒーター CLAS OE 0610のPDF マニュアルをオンラインで閲覧またはダウンロードできます。CLAS OE 0610 12 ページ。 Outil degrippage par induction induction heater

OE 0610

INDUCTION HEATER

GENERAL SAFETY

1. Keep a fire extinguisher or fire blanket alongside at all times when using the heating inductor.

2. Ensure no flammable products are near the work area while using the heating inductor.

3. Do not use the heating inductor within 150mm of any air bag component. The heat created

by the heating inductor can ignite the air bag squib propellant causing it to explode without

warning.

4. Do not operate the heating inductor while under the influence of drugs, alcohol or any

medication.

5. The heating inductor can heat these metallic objects very quickly and cause serious burns or

even ignite clothing.

6. Do not use an attachment if the insulation has been breached. They cannot be repaired, only

replaced.

7. Ensure the heating inductor is connected to a supply that is adequately earthed. (Grounded)

8. Do not use the heating inductor in the rain, moisture or immersed in water.

9. Exposing the heating inductor to water or other liquids can cause an electrical shock hazard.

1. If you have a cardiac pacemaker or any other kind of electronic or metal surgical implant DO

NOT operate this tool, and always stay at least 1 metre away from anybody operating it.

2. Although the magnetic fields emitted by the tool only travel a few inches, they pose a

dangerous risk to the proper operation of all implanted medical electronic devices in the user

and any bystanders.

3. Do not operate the heating inductor while wearing any metallic items such as jewellery,

(including ring, watches, chains, identification tags, body piercing) or belt buckles.

4. Do not wear clothing that contains metallic rivets, waistband buttons, pocket buttons or

zips when operating the heating inductor.

5. Fumes and smoke from hot/burning adhesives are toxic. Wear an appropriate dual filter

(dust and fume) mask.

6. Always wear heat-resistant gloves when using the heating inductor as it heats metal very

quickly. It can be easily burn your hands and fingers when trying to remove parts from hot

metal surfaces.

7. Do not touch the coil, rope coil or body pad when the heating inductor plugged into the

outlet.

8. Coils will be hot after use, please take great care when fitting/removing.

9. Do not use OE 0610 near the device with pyrotechnics (e.g. airbag). The resulting heat can

cause their unexpected explosion. Keep a minimum distance of 10-20 cm from these devices.