- ページ 4

デスクトップ Lenovo ThinkStation P620のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Lenovo ThinkStation P620 42 ページ。 Storage configurator
Lenovo ThinkStation P620 にも：セットアップマニュアル (4 ページ), セットアップマニュアル (8 ページ), セットアップマニュアル (8 ページ)

Considerations

 The P620 has on-board RAID support for both the NVMe and SATA. At

the time of writing the are no add-in RAID controllers certified to work on

the P620.

 The ability to maximize the number of NVMe drives is dependent upon

using two optional Quad M.2 PCIe adapters, a single optional NVMe

M.2 PCIe Add In Card, and the two on-board NVMe M.2 slots. Two

Quad M.2 PCIe adapters can only be used if a single wide GPU is used.

Slot 3 is reserved for the first GPU. Slot 1 and Slot 4 are the only other

x16 PCIe slots that can accommodate a Quad M.2 PCIe adapter.

 The ability to maximize the number of SATA drives is dependent upon

using two default HDD bays located at the bottom of the chassis, as well

as two additional optional HDD bays that will mount next to those, and

finally adding an additional storage location in the front bay. Using the

front bay for an HDD device will require an optional Flex bay - Flex

storage enclosure, a Front-access storage enclosure (FASE). For more

information see Section 2.

 The P620 can simultaneously utilize up to fourteen drives. If the NVMe

RAID controller is enabled this will reduce the maximum number of

drives supported. Enabling the SATA RAID controller in addition to the

NVMe RAID controller will further affect the number of supported drives.

o If the NVMe RAID controller is disabled and the SATA RAID

controller is enabled or disabled, the system will support up to

fourteen drives.

o If the NVMe RAID controller is enabled and the SATA RAID

controller is disabled, the system will support a maximum of

thirteen drives. Although the system can support thirteen drives,

it can only support up to eight NVMe drives in any configuration.

The maximum number of NVMe drives is eight and the maximum

number of SATA drives is five.

o If the NVMe RAID controller is enabled and the SATA RAID

controller is enabled, the system can support a maximum of eight

drives. Although the system can support eight drives, it can only

support a maximum of six NVMe drives in any configuration.