- ページ 9

デスクトップ Lenovo ThinkStation P710のPDF ハードウェア構成をオンラインで閲覧またはダウンロードできます。Lenovo ThinkStation P710 35 ページ。 How to create and configure raid arrays
Lenovo ThinkStation P710 にも：ユーザーマニュアル (36 ページ), 設定マニュアル (49 ページ)

ページを印刷する

P500/P510/P700/P710 via Manual HDD Connect Option

For P500/P510 and P700/P710, SATA drives are connected to the onboard Intel S-SATA controller via a

manual plug method. This consists of manually cabling both power and data to each drive individually.

Total drive support is the same as P900/P910, with the onboard Intel S-SATA controller supporting up to

4 drives.

1. Install the SATA drive into the FLEX Tray. Note that FLEX Trays can be rotated 180 degrees as

needed for ease of connection.

2. Insert the FLEX Tray with drive into the bay.

3. Connect SATA power to the drive using one of the SATA power connectors on the included

cable. The other end of the SATA power cable should already be connected to the

motherboard.

4. Connect the SATA data cable to the drive.

5. Connect the SATA data cable to one of the onboard SATA ports (refer to the system label on the

system cover for the SATA port location).