- ページ 3

デスクトップ Lenovo ThinkStation P910のPDF 設定マニュアルをオンラインで閲覧またはダウンロードできます。Lenovo ThinkStation P910 49 ページ。 How to create and configure raid arrays
Lenovo ThinkStation P910 にも：ハードウェア構成 (35 ページ)

ページを印刷する

2. Configuring RAID Arrays

Configuring RAID arrays using the onboard Intel S-SATA controller

Legacy BIOS Method

Use this method to create a basic RAID array using the onboard Intel S-SATA controller with the system

BIOS set to Legacy mode.

NOTE: This document shows the BIOS screens in Text Mode. P510/710/910 uses a GUI interface for the

BIOS setup screens by default. The general structure/layout of the BIOS setup screens in GUI Mode are

the same as Text Mode, but will look slightly different.

1. Install the drives for the RAID array into the system.

P500/P510

2. Power on the system and enter BIOS setup using the F1 key when prompted.

P900/P910

P700/P710