- ページ 22

サーバー Lenovo System x3850 X6のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Lenovo System x3850 X6 34 ページ。 Ibm to lenovo upgrade
Lenovo System x3850 X6 にも：インストレーション・マニュアル (50 ページ)

ページを印刷する

With only four drives installed, it is mandatory to leave the top filler (Figure 21) in place for

cooling and EMC reasons.

8x1.8-inch

drive filler

Figure 21 Drive filler

Pre-installation checklist

Before you install the server and get it up and running, complete the following steps:

1. Validate the type of power feeds for the system. Make sure that both the number and types

of power supplies are present to support the level of PSU redundancy required.

2. Prior to installing any additional hardware, apply AC power and log into the IMM. Update

the base system firmware (IMM/UEFI/Dynamic System Analysis (DSA)) via the IMM.

Update the firmware in the following order:

a. Update both IMM banks and restart the IMM, which can take up to 15 minutes.

b. Update both UEFI banks and start the system. (This process can take up to 30 minutes

for the firmware update to complete.) The F1 screen displays when UEFI has

completed the update.

c. Press F1, go into UEFI, and load the defaults. This process can also be done via the

ASU tool by entering:

/asu64 loaddefaults UEFI --host xxx.xxx.xxx.xxx --user USERID --password

PASSWORD

d. After the IMM and UEFI have been updated via the IMM interface, we recommend

using Bootable Media Creator™ (BoMC) to update the system to the current versions

of firmware.

Lenovo System x3850 X6 and x3950 X6 Quick Start Guide

Drive

LEDs

8x1.8-inch

drive backplane

assembly

Storage book