- ページ 12
モニター Lenovo 4434-HB6のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Lenovo 4434-HB6 31 ページ。 Lenovo wide flat panel monitor user's guide
Lenovo 4434-HB6 にも： ユーザーマニュアル (31 ページ)
ページを印刷する
Adjusting your monitor image
This section describes the user control features used to adjust your monitor image.
Using the direct access controls
The direct access controls can be used when the On Screen Display (OSD) is not
displayed.
Note: The direct access controls are blue.
Table 2-1. Direct access controls
Icon
Using the On-Screen Display (OSD) controls
The settings adjustable with the user controls are viewed through the On-Screen
Display (OSD), as shown below.
To use the controls:
1. Press
2. Use
3. Press
4. Press and hold
5. Enables DDC/CI by default. Use OSD Exit Key,Press and hold the
10 seconds to disable / enable DDC/CI function. The words " DDC/CI Disable/DDC/
CI/Enable" shows on the screen.
All manuals and user guides at all-guides.com
Control
Input Change
Image Setup
Brightness
to open the main OSD menu.
or
to move among the icons. Select an icon and press
that function. If there is a sub-menu, you can move between options using
or
, then press
to select that function. Use
Press
to save.
to move backwards through the sub-menus and exit from the OSD.
for 10 seconds to lock the OSD. This will prevent accidental
adjustments to the OSD. Press and hold
and allow adjustments to the OSD.
Description
Switches the video input source.
Activates automatic image adjustment.
Direct access to Brightness adjustment.
or
to make adjustments.
for 10 seconds to unlock the OSD
Chapter 2. Adjusting and using your monitor
to access
buttons for
2-3