- ページ 13

モニター Lenovo 6307BTN - E75 - 17" CRT DisplayのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Lenovo 6307BTN - E75 - 17" CRT Display 21 ページ。 Lenovo thinkvision e75: user guide

ページを印刷する

Notes

. • Do not install the monitor in a location near heat sources such as radiators or air ducts , or in a place

subject to direct sunlight , or excessive dust or mechanical vibration or shock.

. • Save the original shipping carton and packing materials, as they will come in handy if you ever have

to ship your monitor.

. • For maximum protection, repackage your monitor as it was originally packed at the factory.

. • To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains can be

removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents

such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety

precaution, always unplug the monitor before cleaning it.

Front control locations and functions

Operation

(1) Switching the monitor on/off (

off. The ON/OFF switch does not disconnect the device from the mains voltage. To completely

disconnect the mains voltage, please remove the power plug from the socket.

(2) Power indicator: This indicator lights up green when the monitor operates normally. If the monitor is

in Energy saving mode, this indicator color changes to flash .

(3)

To adjust visual settings ( "

selection and adjusting an item using the OSD system as below steps for main functions adjustment.

Step 1: Press and release

Step 2: Press

Step 3: Press and release

changed from blue to green.

Step 4: To make your adjustments, press

Step 5: Press and release

can select other function to make adjustments by

EXIT icon or press

Step 6: Additional adjustment function for contrast and brightness when press

directly.

): The ON/OFF switch is used for switching the monitor on and

", "

control key to activate the OSD menu.

key to highlight the desired option of OSD icon.

key to access the option. The color of the inner area of the OSD will

key to store the changed, the color of the inner area will go back to blue. You

key to exit the OSD menu.

", "

" ): Please following the procedure of

key to increase or

and

key to decrease the setting.

key. Also you can select

key