ページを印刷する
LENOVO
I908 Mobile Phone Maintenance Manual
the rear housing assembly 19;
Fit the main board 10 into the rear housing 19. Make sure that it is fixed
in the correct position and that none of the keys are obstructed when
pressed.
Assemble the rear housing assembly 19 with the front housing
assembly 5. Make sure that 4 screws 18 are locked on the
corresponding positions on the rear housing assembly;
Attach the sound cavity seal foam 21 and camera decoration assembly
23 to the corresponding positions on the rear housing decoration
assembly 22 and fix the rear housing decoration assembly 22 on the
back of the rear housing;
Attach the main lens 1
t the corresponding position in the front housing
a
assembl
5
y
Attach the seal pad 27 to the corresponding positions on the rear
housing and paste the main body label 26 on the battery cabin on the
rear housing;
Place the built-in battery (25) in the phone and clip the battery cover
(24).
5.2 i909 Parts Layout
5.2.1 Location of main label on the Rear Housing
Page 30