ページを印刷するVMware Virtual Center (vCenter) for VMready
Routing Information Protocol (RIP)
Internet Group Management Protocol (IGMP)
Border Gateway Protocol (BGP)
Virtual Router Redundancy Protocol (VRRP)
sFLOW
Standards supported
The G8000 switch supports the following IEEE standards:
IEEE 802.1D Spanning Tree Protocol (STP)
IEEE 802.1s Multiple STP (MSTP)
IEEE 802.1w Rapid STP (RSTP)
IEEE 802.1p Class of Service (CoS) prioritization
IEEE 802.1Q Tagged VLAN (frame tagging on all ports when VLANs are enabled)
IEEE 802.1x port-based authentication
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T copper twisted-pair Gigabit Ethernet
IEEE 802.3z 1000BASE-SX short range fiber optics Gigabit Ethernet
IEEE 802.3z 1000BASE-LX long range fiber optics Gigabit Ethernet
IEEE 802.3ad Link Aggregation Control Protocol
IEEE 802.3x Full-duplex Flow Control
IEEE 802.3ae 10GBASE-SR short range fiber optics 10 Gb Ethernet
IEEE 802.3ae 10GBASE-LR long range fiber optics 10 Gb Ethernet
IEEE 802.3ae 10GBASE-ER extended range fiber optics 10 Gb Ethernet
IEEE 802.3ak 10GBASE-CX4 copper twinax 10 Gb Ethernet
10GSFP+Cu SFP+ Direct Attach copper
Connectors and LEDs
Figure 2 shows the front panel of the RackSwitch G8000.
Figure 2. Front panel of the RackSwitch G8000
The front panel of the G8000 contains the following components:
RackSwitch G8000
9