- ページ 16

スイッチ Lenovo RackSwitch G8264のPDF 製品マニュアルをオンラインで閲覧またはダウンロードできます。Lenovo RackSwitch G8264 23 ページ。
Lenovo RackSwitch G8264 にも：製品マニュアル (26 ページ)

24 or more per RackSwitch G8264.

10 Gb Ethernet Pass-Thru Module for BladeCenter

For many clients looking to use a pass-through module, upstream costs can be expensive,

especially if you are connecting to a core switch and are looking at up to fourteen 10 Gb ports

per chassis. The G8264 provides a much more cost-effective alternative and can support up to

four fully populated BladeCenter H chassis per RackSwitch. This alternative is also much better

for larger BladeCenter H environments compared to a smaller 24-port switch.

Low-profile, high-performance, 48/64-port 10 GbE switch needed for aggregation function per rack.

Figure 4 shows 10 GbE port aggregation, and Table 6 lists the features and benefits.

Figure 4. 10 GbE port aggregation

Table 6. Features and benefits

Features

Line-rate, non-blocking, all 64-ports

Deterministically low latency

Support for IGMP Snooping and L3 forwarding

Standards-based Layer 2/3 protocols; industry standard CLI

Rack-optimized server aggregation: 1 GbE attached rack servers

The design goal is to have the RackSwitch G8264 (10 GbE) switch at the distribution layer and RackSwitch

G8000/G8052 (1 GbE) at the Edge/Access layer.

The G8264 is also ideal at the distribution layer when you are looking to aggregate connections for access layer

RackSwitch G8264

Benefits

Supports massive compute and virtualization workloads

Faster application response times

Enables high-bandwidth, low-latency multicast applications

Interoperates with the existing network; no learning curve