- ページ 4
掃除機 Dirt Devil 360 REACH DD360のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dirt Devil 360 REACH DD360 20 ページ。
ページを印刷する
- 1. Table of Contents
- 1. Quick Start Assembly
- 2. Tools
- 3. Using the Tools
- 3. Above Floor Cleaning
- 4. How to
- 4. Empty the Dirt Cup
- 4. Clean the Rinsable Filter
- 4. Clean the Exhaust Filter
- 4. Clean the Cyclonic Filter Assembly
- 4. Clean the Brush Roll
- 4. Store Your Unit
- 5. Troubleshooting
- 6. Technical Specifications
21. Do not put any objects into openings. Do not use with any openings blocked and do
not restrict airflow. Keep all openings free of dust, lint, hair or anything that might
reduce airflow.
22. Do not use the vacuum cleaner with blocked filters and without all of the filters in place.
23. Take extra care when positioning the vacuum cleaner on the stairs.
24. Keep vacuuming area well lit.
WARNING: Always switch off and unplug the vacuum cleaner from the electrical
socket before assembling, opening or emptying the dirt container, or before connecting/
disconnecting the attachments.
CAUTION: The vacuum cleaner is a very powerful unit. Before plugging the cord into the
electrical socket, make sure the switch is in the 'off' position.
IMPORTANT: If the inlet or wand is blocked, switch off the vacuum cleaner and remove
the blockage(s) before re-starting the vacuum cleaner.
IMPORTANT: Dirt Devil recommends the use of Residual Current Device Rating of 30mA or
less.
NOTE: If the supply cord is damaged it must be replaced by the manufacturer, or a similarly
qualified person in order to avoid hazard, or invalidating the warranty.
DAMAGE TO THE VACUUM CLEANER CAUSED AS A DIRECT RESULT
OF NOT ADHERING TO THE GENERAL SAFETY INFORMATION AND THE
INSTRUCTIONS IN THIS USER GUIDE INVALIDATES THE WARRANTY.
This machine is intended for household use only, and NOT for commercial
or industrial use.
PLEASE KEEP THESE INSTRUCTIONS FOR FURTHER USE.
4