- ページ 4

デジタルカメラ Nikon Coolpix 5000のPDF ポケットマニュアルをオンラインで閲覧またはダウンロードできます。Nikon Coolpix 5000 14 ページ。 Using nikon view 4 with windows xp home edition / windows xp professional
Nikon Coolpix 5000 にも：仕様 (2 ページ), ファームウェア・アップデート (5 ページ), ユーザーマニュアル補遺 (2 ページ), パンフレット＆スペック (4 ページ), ソフトウェアマニュアル (7 ページ), 仕様 (3 ページ)

ページを印刷する

A S

HORT

OURSE IN

IKON

OOLPIX

Taking a Picture in Programmed Auto Mode

1. Set the mode selector on the back of the camera

to the shooting position (the camera icon),

remove the lens cap, and turn the power switch

to ON. The camera beeps once and the lens

extends out.

2. Compose the image in the viewfinder making

sure the subject that you want sharpest is in the

focus brackets in the center of the viewfinder.

3. Press the shutter button halfway down so the

camera can set focus and exposure. When these

are set, the AF lamp next to the viewfinder

glows a steady green. If the camera has prob-

lems focusing, the lamp flashes (page 65). If the

red lamp glows it means the flash will fire

when you take the picture.

4. Press the shutter button all the way down to

take the picture. The camera beeps and the AF

lamp next to the viewfinder flashes green as

the image is saved to the CompactFlash card.

5. When done, turn the power switch to OFF and

replace the lens cap.

Selecting a User Set with the FUNC Button

With the camera on and the mode selector on the

back of the camera set to shooting mode (the camera

icon), hold down the FUNC button and rotate the

command dial to display A, 1, 2, or 3 on the control

panel.

Selecting a User Set From the menu

1. With the camera on and the mode selector on

the back of the camera set to shooting mode

(the camera icon), open the monitor and press

the MENU button to display the shooting

menu.

2. The USER SETTING icon at the top of the

menu is highlighted, so just press the right

point on the Multi Selector to display a list of

user sets (the letter A and the numbers 1, 2, or 3

in boxes)

3. Press the up or down point on the Multi

Selector to select a user set, then press the right

point to set it.

4. Press the MENU button to hide the menu.

Using Menus

To display the menu in any user set, open the

monitor and press the MENU button.

To move up and down a menu to highlight

commands or icon, press the up or down point on

the Multi Selector. As you highlight a command

or icon (or tab), it turns orange and the

HORT

OURSES

ITE AND

5000 P

HOTOGRAPHY

LINE

IGITAL

HOTOGRAPHY

command's full name is displayed at the bottom

or top of the monitor. (On the Set-up and Play

Back menus the command names are spelled out

right on the menu.)

To move between tabs 1 and 2 on the shooting

menu in user sets 1, 2, and 3, highlight the first or

last item on the menu and press the up or down

points on the Multi Selector. You can also press

the left point to highlight one of the tabs, the up or

down point to highlight the desired tab, then the

right point to activate the menu. You can also

move to Page 2 of the menu by pressing the

MENU button but only when PAGE 2 is displayed

above or below the menu.

To display a submenu when a highlighted

menu command displays a solid right-pointing

arrowhead, press the right point on the Multi

Selector. (To hide the submenu, press the left

point.)

To set (activate) a highlighted command (one

with a hollow or outlined arrowhead), press the

right point on the Multi Selector. The setting

applies immediately.

To display the Set-up menu, press the left

point on the Multi Selector to highlight the tab for

the current menu, then press the up or down

point to highlight the S tab. Press the right point

to activate the menu. The Set-up menu is de-

scribed in detail beginning on page 123.

To hide the menu, press the MENU button

once when MENU OFF is displayed above or

below the menu.

1. With the camera in user set 1, 2, or 3, open the

monitor and press the MENU button to display

the menu.

2. Press the up or down point on the Multi

Selector to highlight the RESET ALL icon (a

letter "C") on tab 2 of the menu and press the

right point to display a submenu.

3. Press the up or down point on the Multi

Selector to highlight Reset and press the right

point to select it and reset the commands.

4. Press the MENU button to hide the menu.

1. Slide the mode selector on the back of the

camera to Playback mode (the arrowhead in a

box icon) and open the monitor to display the

last photo you took. If there isn't at least one

photo on the CF card you'll get the message

CARD CONTAINS NO IMAGES."

OOKSTORE

Resetting the menus

Reviewing Images

://

HTTP

WWW

SHORTCOURSES

COM