- ページ 11

掃除機 Dirt Devil Bandit DDBBCのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dirt Devil Bandit DDBBC 17 ページ。

FAQ

WARNING: To reduce the risk of personal injury, unplug the vacuum cleaner before performing

maintenance/troubleshooting checks.

Problem

The cleaning results are

unsatisfactory in spite of the

appliance working correctly

The dust filter bag change indicator

appears in the window (Fig. 21).

The vacuum cleaner stops

suddenly

dirtdevil.com.au

Solution

The air auxiliary regulator (Fig. 2) is open. Close the air auxiliary regulator (Fig. 2).

Position of the suction power control is not appropriate (Fig. 14). Adjust the position of the

suction power control (Fig. 14).

The attached accessory is unsuitable. Change the accessory, ' A ssemble appliance and adjust

accessories to surface' .

The collar brush of the combination floor tool is not in a position appropriate to the type of

floor (Figures 6 – 7). Adjust the position of the collar brush on the combination floor tool

switch using the rocker switch (Figures 6 – 7).

The dust bag is full. Replace the dust bag 'Changing the dust bag' , page 7.

The filters are dirty. Clean the filters, pages 8-9.

Accessories, telescopic tube or suction hose is blocked. Remove the obstruction. If necessary,

use a long wooden stick (e.g. a broomstick) to do this.

The dust bag is full. Change the dust bag, page 7.

The filters are dirty. Clean the filters, pages 8-9.

Accessories, telescopic tube or suction hose is blocked. Remove the obstacle. If necessary,

use a long wooden stick (e. g. a broomstick) to do this.

The overheating protection has tripped (possibly due to blocked suction channels, filters, or similar).

1. Switch the appliance off and pull the plug out of the socket.

2. Remove the cause of overheating (e.g. by disassembling telescopic tube and suction hose

and removing the obstacle and/or cleaning filters).

3. Wait approx. 1 hour until the appliance has cooled off.

4. After the appliance has cooled off, you may switch it on again.