ページを印刷する
Imprinting Date/Time
You can imprint the following date information on your picture (in any
exposure mode): Year/Month/Day, Day/Hour/Minute, Month/Day/Year
or Day/Month/Year.
Imprinted date/time
The illustration at right indicates the position of
the imprinted date/time. It may be difficult to
read against bright colors such as white or
reddish hues.
NOTE: Battery requirements for imprinting
Imprinting of date/time requires one CR2025 3V lithium battery separate from
the batteries required for the camera body. Battery life is approx. 3 years.
When the imprinting on the photo appears faded and/or the display of the data
imprint on the LCD becomes faint or disappears, this indicates low battery
power. Replace the battery (making sure to set correct date/time after
changing battery, page 53).
Changing battery for imprinting
Open camera back, remove the screw on the inside of
the camera back. Remove the battery chamber cover
and then remove the used battery.
• Insert a new CR2025 3V lithium battery with + side facing up. Attach the
battery chamber cover and tighten the screw on the inside of the camera back.
52
(for F60
only)
D
Adjusting date and time
1
Press MODE button to select available displays.
Press SELECT button to select date/time to be
adjusted.
• Date adjustment cannot be performed with the Day/Hour/Minute display.
To do so, you must select Year/Month/Day, Month/Day/Year or
Day/Month/Year displays.
2
Press ADJUST button to set the correct number.
Then press SELECT button until the number stops
blinking.
• To change the numerical indication rapidly, hold the ADJUST button
down. The years are numbered 1 to 19, 87 to 99 and 00 in that order. To
complete adjustment, press SELECT button so the number stops blinking
—
and
(data imprint indicator) appears.
53