- ページ 2

カメラレンズ Nikon NIKKOR Z MC 50mm f/2.8のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Nikon NIKKOR Z MC 50mm f/2.8 3 ページ。

ページを印刷する

User's Manual

Before using this product, please read these instructions carefully. You will also need to

consult the camera manual.

• This lens is intended exclusively for use with mirrorless cameras featuring a Nikon Z

mount.

• Update the camera ﬁ rmware to the latest version. With earlier versions, the camera

may fail to detect the lens correctly and some features may not be available. The latest

version of the camera ﬁ rmware can be downloaded from the Nikon Download Center

at the URL below.

https://downloadcenter.nikonimglib.com/

For Your Safety

To prevent damage to property or injury to yourself or to others, read "For Your Safety"

in its entirety before using this product.

Keep these safety instructions where all those who use this product will read them.

A WARNING: Failure to observe the precautions marked with this icon could

result in death or severe injury.

A CAUTION: Failure to observe the precautions marked with this icon could

result in injury or property damage.

A WARNING

WARNING

• • Do not disassemble or modify this product.

Do not disassemble or modify this product.

Do not touch internal parts that become exposed as the result of a fall or other accident.

Failure to observe these precautions could result in electric shock or other injury.

• • Should you notice any abnormalities such as the product producing smoke,

Should you notice any abnormalities such as the product producing smoke,

heat, or unusual odors, immediately disconnect the camera power source.

Continued operation could result in ﬁ re, burns or other injury.

• • Keep dry.

Keep dry.

Do not handle with wet hands.

Failure to observe these precautions could result in ﬁ re or electric shock.

• • Do not use this product in the presence of ﬂ ammable dust or gas such as

Do not use this product in the presence of ﬂ ammable dust or gas such as

propane, gasoline or aerosols.

Failure to observe this precaution could result in explosion or ﬁ re.

• • Do not directly view the sun or other bright light source through the lens.

Do not directly view the sun or other bright light source through the lens.

Failure to observe this precaution could result in visual impairment.

• • Keep this product out of reach of children.

Keep this product out of reach of children.

Failure to observe this precaution could result in injury or product malfunction. In

addition, note that small parts constitute a choking hazard. Should a child swallow

any part of this product, seek immediate medical attention.

• • Do not handle with bare hands in locations exposed to extremely high or

Do not handle with bare hands in locations exposed to extremely high or

low temperatures.

Failure to observe this precaution could result in burns or frostbite.

A CAUTION

CAUTION

• • Do not leave the lens pointed at the sun or other strong light sources.

Do not leave the lens pointed at the sun or other strong light sources.

Light focused by the lens could cause ﬁ re or damage to product's internal parts. When

shooting backlit subjects, keep the sun well out of the frame. Sunlight focused into

the camera when the sun is close to the frame could cause ﬁ re.

• • Do not leave the product where it will be exposed to extremely high temperatures,

Do not leave the product where it will be exposed to extremely high temperatures,

for an extended period such as in an enclosed automobile or in direct sunlight.

Failure to observe this precaution could result in ﬁ re or product malfunction.

• • Do not transport cameras or lenses with tripods or similar accessories attached.

Do not transport cameras or lenses with tripods or similar accessories attached.

Failure to observe this precaution could result in injury or product malfunction.

Notices for Customers in the U.S.A.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must ac-

cept any interference received, including interference that may cause undesired operation.

Federal Communications Commission (FCC) Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reason-

able protection against harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communica-

tions. However, there is no guarantee that interference will not occur in a particular instal-

lation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment oﬀ and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit diﬀ erent from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/television technician for help.

CAUTIONS

Modiﬁ cations

The FCC requires the user to be notiﬁ ed that any changes or modiﬁ cations made to

this device that are not expressly approved by Nikon Corporation may void the user's

authority to operate the equipment.

Nikon Inc., 1300 Walt Whitman Road,

Melville, New York 11747-3064, U.S.A.

Tel.: 631-547-4200

Notice for Customers in Canada

CAN ICES-3 B / NMB-3 B

Using the Lens

Parts of the Lens: Names and Functions

Refer to the diagram on the left edge of this sheet.

Lens hoods block stray light that would other-

Lens hood

wise cause ﬂ are or ghosting. They also serve to

protect the lens.

An attachment point for the lens cap, lens

hood, and 46 mm ﬁ lters.

Attachment point for

• This attachment point is for use exclusively

46 mm ﬁ lters

with the lens cap, lens hood, and 46 mm ﬁ l-

ters, and should not be used with other ac-

cessories.

An attachment point for SY-1-62

adapter

rings for use with optional SB-R200 ﬂ ash units

and 62 mm B adapters

for use with optional

ES-2 ﬁ lm digitizing adapters.

• The accessory attachment point is for use

Accessory attach-

exclusively with SY-1-62 adapter rings and

ment point

62 mm B adapters and should not be used

with other accessories. Attaching ﬁ lters, lens

caps, or other accessories that could inter-

fere with the lens as it extends could result in

product malfunction or damage to the lens

caused by contact with the accessory.

Autofocus mode selected:

In autofocus mode, rotate the ring to adjust

a setting such as [Focus (M/A)] or [Aperture]

assigned using the camera. For more informa-

tion, see the description of [Custom control

Control ring

assignment], [Custom controls], or [Custom

controls (shooting)] in the camera manual.

Manual focus mode selected:

Rotate the ring to focus.

View the reproduction ratio and focus distance

for close-up photography.

Reproduction ratio

• The reproduction ratio and focus distance

indicator

shown by the reproduction ratio indicator are

approximations only and their accuracy is not

guaranteed.

Lens mounting mark Use when mounting the lens on the camera.

Rubber lens-mount

—

gasket

CPU contacts

Used to transfer data to and from the camera.

Choose a focus mode.

Focus-mode switch

• A: Autofocus

• M: Manual focus

Note that regardless of the setting chosen, fo-

cus must be adjusted manually when manual

focus mode is selected using camera controls.

Choose the focus distance limits for autofocus

according to your goals.

• FULL: Choose for subjects at distances any-

Focus limit switch

where in the lens's full autofocus range

(0.16 m/0.53 ft to inﬁ nity).

• 0.3 m – 0.16 m: Limit autofocus to distances

of 0.16 m (0.53 ft) to 0.3 m (0.98 ft). Choose

this option for faster focusing when shooting

close-ups or at any other time you anticipate

that your subject will be no more than 0.3 m

away.

Lens cap (front cap)

—

Lens cap (rear cap)

1 Attaching the SB-R200 requires an SX-1 attachment ring in addition to the

SY-1-62 adapter ring. For information on using the SB-R200, see the documenta-

tion provided with the fl ash unit.

2 For information on using the ES-2 fi lm digitizing adapter, see the documentation

provided with the ES-2.

Attachment and Removal

Attaching the Lens

Turn the camera off , remove the body cap, and detach the rear lens cap.

Position the lens on the camera body, keeping the mounting mark

on the lens aligned with the mounting mark on the camera body,

and then rotate the lens counterclockwise until it clicks into place.

Turn the camera on.

• The lens will extend automatically.

Extending the Lens

• Do not place the camera on a surface with the lens pointing

down. Be particularly careful not to turn the camera on while

it is resting on the lens, as the lens may malfunction if it fails

to extend.

• Do not hold the telescoping section or attempt to forcibly ex-

tend or retract the lens. Failure to observe these precautions

could result in product malfunction.

• If the lens does not extend or freezes in place once extended, press the shutter-release button.

Removing the Lens

Turn the camera off .

• The lens will retract automatically. Proceed to Step 2 after confi rming

that the lens is fully retracted.

Press and hold the lens release button while turning the lens clockwise.

Removing the Lens While It Is Extended

The lens will not retract if removed while the camera is on. To retract the lens, turn the camera off , reat-

tach the lens, turn the camera on, and then turn the camera off and remove the lens in the correct order.

Attaching and Removing the Lens Hood

The lens hood screws directly onto the attach-

ment point for 46 mm ﬁ lters.

• Before attaching or removing the lens hood,

turn the camera oﬀ and conﬁ rm that the lens is

retracted. In addition, be careful not to touch or

apply excessive force to the glass part of the lens.

• To remove the hood, unscrew it from the lens.

Shooting Close-Ups

This lens can be used for close-ups, letting you get closer to your subject so that it ﬁ lls

more of the frame. When shooting close-ups, note the following:

• Close-ups are prone to blur caused by camera shake. We recommend that you mount

the camera on a tripod and release the shutter using an optional remote cord or wire-

less remote controller.

• Shooting at short focus distances noticeably reduces depth of ﬁ eld. To increase depth

of ﬁ eld and so increase the apparent depth of focus in front of and behind the focus

point, stop aperture down and increase exposure times.

• Be careful not to strike your subject when using the lens hood.

Adjusting Aperture

The aperture of the lens varies in a range that changes with focus distance. At a focus

distance of inﬁ nity, aperture ranges from f/2.8 to f/22, while the range at a focus dis-

tance of 0.16 m (0.53 ft) is f/5.6 to f/32. At apertures matching or close to the maximum

and minimum for the lens in modes A and M, eﬀ ective aperture

justed for changes in focus distance as shown.

For example, if an aperture of f/2.8 is

selected at a focus distance of inﬁ nity, the eﬀ ective aperture when the focus distance is

reduced to 0.16 m (0.53 ft) will be f/5.6.

f/2.8

f/4

f/5.6

f/8

f/11

∞

0.79m(2.60 ft)

0.36m(1.19 ft)

0.27m(0.89 ft)

0.16m(0.53 ft)

(f/5.6)

See

Aperture range

1 Due to the way the lens is constructed, the brightness of the image it projects on the

image sensor varies with focus distance. The image darkens as the focus distance

drops and the reproduction ratio increases. The camera consequently shows an "ef-

See

fective aperture" that refl ects this variation in brightness.

2 Assuming an aperture step size of 1/3 EV.

Choosing a Reproduction Ratio

To take pictures at a selected reproduction ratio—for example, 1:1 (life size) or 1:2 (half

life-size):

Slide the focus-mode switch to M.

Rotate the control ring until the desired reproduction ratio is selected on the

—

reproduction ratio indicator.

• For example, to select a reproduction ratio

of 1:2, rotate the control ring until the in-

dex points to "1:2". Do not rotate the con-

trol ring after choosing the reproduction

ratio.

—

Position the camera so that the subject is in focus.

• Move the camera forward or back until the image in the shooting display is in

focus.

Reproduction Ratio

The "reproduction ratio" is the ratio of the apparent size of an object on the image sensor to its true size. If the length

of the subject on the image sensor is 1 cm when the actual subject is 2 cm long, for example, the reproduction ratio

is 1:2 (half life-size).

—

Taking Photographs

• Touching the extended portion of the lens while au-

tofocus is in progress may interrupt the focus opera-

See

tion. Normal function can be restored by pressing the

shutter-release button.

—

• The focus position may change if you turn the camera oﬀ and then on again after

focusing. If you have focused on a pre-selected location while waiting for your sub-

—

ject to appear, we recommend that you do not turn the camera oﬀ until the picture

is taken.

Cameras with AF-Assist Illuminators

The lens or lens hood may block the light from the camera AF-assist illuminator.

• For the information on using the lens with cameras that have built-in AF-assist illumi-

nators, visit the site below.

https://downloadcenter.nikonimglib.com/

Using the Lens on Cameras with a Built-in Flash

Shadows will be visible in photos where light from the built-in ﬂ ash is obscured by the

lens or lens hood. Remove the lens hood before shooting. Note, however, that depend-

ing on the distance to the subject, and in the case of zoom lenses also on the lens focal

length, shadows may appear even when the lens hood is removed.

—

• For the information on focal lengths and subject distances at which shadows will not

appear in photos taken with a built-in ﬂ ash, visit the site below.

https://downloadcenter.nikonimglib.com/

Precautions for Use

• Do not pick up or hold the lens or camera using only the lens caps or lens hood.

• Keep the CPU contacts clean.

—

• Should the rubber lens-mount gasket be damaged, cease use immediately and take

—

the lens to a Nikon-authorized service center for repair.

• Replace the lens caps when the lens is not in use.

• Do not leave the lens in humid locations or in locations in which it may be exposed to

moisture. Rusting of the internal mechanism can cause irreparable damage.

• Do not leave the lens next to open ﬂ ames or in other extremely hot locations. Ex-

treme heat could damage or warp the reinforced plastic exterior.

• Taking the lens from a warm to a cold environment or vice versa may cause damaging

condensation inside and outside the lens. Place the lens in a sealed bag or plastic case

before taking it across a temperature boundary. The lens can be taken from the bag or

case once it has had time to adjust to the new temperature.

• We recommend that you place the lens in its case to protect it from scratches during

transport.

Lens Care

• Removing dust is normally suﬃ cient to clean the glass surfaces of the lens.

• When cleaning the ﬂ uorine-coated front lens element:

- Remove ﬁ ngerprints and other oily stains with a soft, clean cotton cloth or third-

party lens cleaning tissue; clean from the center outwards using a circular motion.

- To remove stubborn stains, wipe gently using a soft cloth lightly dampened with a

small amount of distilled water, ethanol, or third-party lens cleaner.

- Drop-shaped marks may form on ﬂ uorine-coated surfaces, which are highly water-

and oil-repellent. Such marks can be removed with a dry cloth.

• When cleaning the rear lens element, which is not ﬂ uorine-coated:

- Remove ﬁ ngerprints and other oily stains with a soft, clean cloth or third-party lens

cleaning tissue lightly dampened with a small amount of ethanol or third-party lens

cleaner; clean from the center outwards using a circular motion. Be sure to clean

evenly and thoroughly without leaving smears.

• Never use organic solvents such as paint thinner or benzene to clean the lens.

• Neutral Color (NC) ﬁ lters (available separately) and the like can be used to protect the

front lens element.

• Do not store with naphtha or camphor moth balls or in direct sunlight. If the lens will not

be used for an extended period, store it in a cool, dry location to prevent mold and rust.

Accessories

Supplied Accessories

• LC-46B Lens Cap (front cap)

• LF-N1 Lens Cap (rear cap)

• HN-41 Lens Hood

• CL-C1 Lens Case

Using the Lens Case

• The case is intended to protect the lens from scratches, not from falls or other physical shocks.

• The case is not water resistant.

• The material used in the case may fade, bleed, stretch, shrink, or change color when rubbed or wet.

• Remove dust with a soft brush.

• Water and stains can be removed from the surface with a soft, dry cloth. Do not use alcohol, benzene, thinner,

or other volatile chemicals.

• Do not store in locations exposed to direct sunlight or high temperatures or humidity.

• Do not use the case to clean the monitor or lens elements.

• Be careful that the lens does not fall from the case during transport.

Material: Polyester

Compatible Accessories

The lens supports the following optional accessories.

• Accessories for use with the attachment point for 46 mm ﬁ lters:

- 46 mm ﬁ lters

• Accessories for use with the accessory attachment point:

- SB-R200 wireless remote ﬂ ash units

- ES-2 ﬁ lm digitizing adapters

* The lens can be used with up to four SB-R200 ﬂ ash units.

Filters

• Use only one fi lter at a time.

• Before attaching or removing fi lters, turn the camera off and confi rm that the lens is retracted.

• Remove the lens hood before attaching fi lters.

Incompatible Accessories

Use only supplied or compatible accessories. Using other accessories could cause product malfunction or dam-

age the accessory or lens. Examples of accessories that cannot be used with each attachment point follow.

• Accessories that cannot be used with the attachment point for 46 mm fi lters:

- Third-party step-up or step-down rings

is automatically ad-

• Accessories that cannot be used with the accessory attachment point:

- Lens caps

- Filters

- AF-3 and AF-4 gel fi lter holders

f/16

f/22

- Third-party step-up or step-down rings

Specifi cations

Mount

Nikon Z mount

Focal length

50 mm

Maximum aperture

f/2.8

Lens construction

10 elements in 7 groups (including 1 ED element, 1 aspherical element,

and a fl uorine-coated front lens element)

(f/32)

Angle of view

• FX format: 47°

• DX format: 31° 30'

Focusing system

Front focusing system

Minimum focus

0.16 m (0.53 ft) from focal plane

distance

Maximum reproduc-

1×

tion ratio

Diaphragm blades

9 (rounded diaphragm opening)

Aperture range

• At a focus distance of inﬁ nity: f/2.8 – 22

• At a focus distance of 0.16 m (0.53 ft): f/5.6 – 32

Focus limit switch

Two positions: FULL (∞ – 0.16 m) and 0.3 m – 0.16 m

Filter-attachment size

Filter-attachment size 46 mm (P = 0.75 mm)

Dimensions

Approx. 74.5 mm/3 in. maximum diameter × 66 mm/2.6 in.

(distance to end of lens from camera lens mount fl ange)

Weight

Approx. 260 g (9.2 oz )

Nikon reserves the right to change the appearance, speciﬁ cations, and performance of this

product at any time and without prior notice.

Pour votre sécurité

A AVERTISSEME

• Ne démontez pas ou ne modiﬁ ez pas ce produ

Ne touchez pas les composants internes qui s

ou à un autre accident.

• Si vous observez des anomalies provenant du

de la chaleur ou des odeurs inhabituelles, dé

source d'alimentation de l'appareil photo.

• Gardez votre matériel au sec.

Ne le manipulez pas avec les mains mouillées.

• N'utilisez pas ce produit en présence de pouss

comme du propane, de l'essence ou des aéros

• N'observez pas directement le soleil ou to

puissante à travers l'objectif.

• Conservez ce produit hors de portée des enfan

• Ne manipulez pas le matériel à mains nues d

températures extrêmement basses ou élevées

A ATTENTION

• Ne pointez pas l'objectif en direction du so

lumineuses.

• Ne laissez pas le produit exposé à des tempéra

pendant une période prolongée, comme da

plein soleil.

• Ne transportez pas les appareils photo ou le

accessoires similaires sont ﬁ xés.

Avis pour les clients au Canada

Utilisation de l'objectif

Descriptif de l'objectif : noms et fonctions