- ページ 9

カメラアクセサリー Nikon D90 - Digital Camera SLRのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Nikon D90 - Digital Camera SLR 26 ページ。 Focal digital camera
Nikon D90 - Digital Camera SLR にも：パンフレット＆スペック (9 ページ), 操作マニュアル (20 ページ), 仕様 (2 ページ), チェックリストとオペレーションマニュアル (25 ページ), マニュアル (28 ページ), どのように (6 ページ), マニュアル (30 ページ)

6. Flash connections

Hugyfot housings can be equiped with Nikonos 5-pins or S-6 flash connec-

tions. These flash connections are plugged into a circuit board inside the

housing. An optional TTL-converter is also available.

The flash connection can be shut off by

using a small protection cap which can be

removed by turning it counter clockwise.

The cap has 2 o-rings which have to be

cleaned together with the thread. After-

wards, slightly grease o-ring and thread.

The flash plug also has to be serviced.

Slightly grease the o-rings and thread and

keep the flash contacts dry.

The multiple socket in the housing has

a small ridge. The projecting part of the

connection has a groove with the same

measurements as the ridge of the connec-

tion. Be sure that, whenever plugging the

connection into the socket, the groove and

the ridge fit well together. Only then the

connection is well positioned. Press the

plug gently into the contact. Then turn it

clockwise to tighten it. Whenever the flash

connection has to be removed from a wet

housing it always has to be positioned downwards. If not, the remaining

water can work its way into the flash connection. In that case, the water has

to be removed immediately by using an absorbing paper. Do not close the

flash connection when it is not entirely dry.

Fourth maintenance command:

Keep the inside of the plug dry and clean. The o-rings, the plug and the

thread need to be clean and slightly greased. DO NOT use the housing with

an open multiple socket: this can cause leakage and corrosion!

Hugyfot Housing for

Nikon D90

Be sure that, whenever plugging the

connection into the socket, the groove

and the ridge fit together well.

User manual