- ページ 25

カメラアクセサリー Nikon D90 - Digital Camera SLRのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Nikon D90 - Digital Camera SLR 28 ページ。 Focal digital camera
Nikon D90 - Digital Camera SLR にも：パンフレット＆スペック (9 ページ), 操作マニュアル (20 ページ), 仕様 (2 ページ), ユーザーマニュアル (26 ページ), チェックリストとオペレーションマニュアル (25 ページ), どのように (6 ページ), マニュアル (30 ページ)

ページを印刷する

AE-L/AF-L button assignment. This

tells you what custom function is

assigned to the AE-L/AF-L button. This

button can be assigned in CSM f4.

Function button assignment. This

tells you what custom function is

assigned to the Function (Fn) but-

ton. This button can be assigned in

CSM f3.

Picture Control indicator. This icon

shows which Picture Control set-

ting is activated.

For more on Picture Controls, see

Chapter 2.

Active D-Lighting indicator. This

icon alerts you to the status of the

Active D-Lighting option. The set-

tings are Auto, High (H), Normal

(N), Low (L), and Oﬀ .

High ISO noise reduction indica-

tor. This lets you know if Long

Exposure NR is being applied. The

settings are High (H), Normal (N),

Low (L), or Oﬀ .

Long Exposure Noise Reduction

(NR) indicator. This lets you know

if Long Exposure NR is activated.

Metering mode display. This dis-

play shows which Metering mode

you're in: Matrix, Center-weighted,

or Spot.

Flash mode indicator. This area

shows you the Flash mode the

camera is using. This option is

shown only when the built-in ﬂ ash

is raised or an accessory Speedlight

is attached. When an accessory

Speedlight is attached, an icon is

displayed in the top-right corner of

Chapter 1

Exploring the Nikon D90

this box. Additionally, this option

shows you if the Speedlight is in

Through-the-Lens mode (TTL),

Repeating Flash mode (RPT), or

Commander mode (CMD).

For more on Flash modes and

Speedlights, see Chapter 6.

Electronic analog exposure dis-

play. As discussed previously, this

is your light meter. When the bars

are in the center, you're at the

proper settings for a good exposure

for your photograph; when the bars

are to the left, your image will be

overexposed; when the bars are to

the right, your image will be under-

exposed. This is displayed full-time

when the camera is set to M mode.

When in P, S, or A or one of the

Scene modes, this is only displayed

when the current settings will

cause an under- or overexposure.

When in Auto mode, if the camera

can't achieve a proper setting, this

simply blinks.

In ﬁ gure 1.13, you see these settings:

AC adapter indicator. When the

optional EH-5a AC adapter is

attached, this icon is displayed.

FV Lock indicator. This icon is

shown when the FV Lock is acti-

vated. The FV Lock can be assigned

to the Function (Fn) or AE-L/AF-L

button.

FEC indicator. When this is dis-

played, your Flash Exposure

Compensation is on. Adjust the FEC

by pressing the Flash mode button

and then rotating the Sub-

command dial.