カメラアクセサリー Nikon NAMCのPDF 使用方法をオンラインで閲覧またはダウンロードできます。Nikon NAMC 4 ページ。 Modulation contrast for ti series

• When using this system, be sure to carefully read all precautions in the instruction manual supplied with the microscope.

• NAMC: Nikon Advanced Modulation Contrast

Names of Parts

(for S Plan FLOUR only)

(40x only for Achromat)

S Plan FLOUR ELWD

20x (NAMC2)

40x (NAMC3)

Notes on Usage

• The name of the condenser lens used in combination with the NAMC module is shown on the top of the module. Use NAMC

or LWD condenser lens. If you use a condenser lens other than the one indicated on the NAMC module being used, the

modulation contrast effect cannot be obtained.

• NAMC module and NAMC objectives are to be used in specific pairs. Always make sure that the NAMC module and NAMC

objective have the same "NAMC code" (NAMC1, NAMC2 or NAMC3). The correct image will not be obtained if the NAMC

codes are different.

• NAMC module is equipped with optical elements made of resin. To clean the NAMC module covered with dust or the like,

lightly blow it off with an air blower. Do not use lens cleaning tissue that could damage the optical elements. Also, avoid using

solvents that may damage the optical elements. Make sure to keep any dirt from coming into contact with the optical

elements during assembly, and especially never to touch them with bare hands.

Assembly

NAMC module

(Set inside the system

condenser turret)

NAMC (Modulation Contrast)

for Ti Series Instructions

NAMC objective

Clamp ring

Modulator ring

Correction ring

10x (NAMC1)

20x (NAMC2)

40x (NAMC3)

Condenser label

Slit aperture centering screws

Achromat

Figure 1

Polarizing filter

(Screwed into the top

of condenser mount)

NAMC objective

(Screwed into the

revolving nosepiece)

Figure 2

M519E

NAMC module

NAMC1, NAMC2, NAMC3

Slit aperture rotation gear

Polarizing filter

Assemble the microscope.

(Refer to the instruction manual supplied with the

microscope for the assembly.)

09.2.NF.1

*M519EN01*