ページを印刷する
Nomenclature of Each Part
The microscope is made up of the following components.
1
Basic unit
2
Eyepieces
Screwed on to the eyepiece tube.
3
Eyepiece tube
This is a binocular eyepiece tube. A trinocular eyepiece tube is available for
photomicrography and TV microscopy. Amonocular eyepiece tube can be used also.
Objectives
4
Objectives with various magnifying powers are available.
5
Condenser
Used for condensing light. The condenser should be positioned slightly lower
than its upper limit.
Adjust the aperture diaphragm lever according to the objective.
6
Field lens unit
Pull the field lens unit upward when changing lamp.
7
Lamp
Halogen lamp of 6 V-20 W is used.
8
Fuse
For the microscope with the nameplate showing [100/110/120 V], 250 V, 1 A, time-lag low-
breaking type, 5X20 miniature fuses (two pieces) are used.
For the microscope with the nameplate showing [220/230/240 V], 250 V, 0.5 A, time-lag low-
breaking type, 5X20 miniature fuses (two pieces) are used.
9
Power cord
Use the power cord provided.
8