- ページ 8
顕微鏡 Nikon Ti-SのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Nikon Ti-S 25 ページ。 Inverted microscope
ページを印刷する
Caution
1.
Turn off the power during installation, assembly, connection/disconnection of cables,
and maintenance.
To prevent electric shock and fire, be sure to turn off the POWER switch on the power supply
device (press the "O" side of the POWER switch) and unplug the power cords before installing or
assembling the product, connecting or disconnecting cables, replacing the lamp, or performing
maintenance tasks such as cleaning of the lenses.
2.
Do not wet the product or allow intrusion of foreign matters.
Do not wet or spill liquids onto the product, as it may result in malfunction, overheat, or electric
shock. If water or other liquids are accidentally spilled onto the product, immediately turn off the
POWER switch (press the "O" side of the POWER switch) and unplug the power cord from the
wall outlet. Then, wipe off the liquid with a piece of dry cloth. Intrusion of foreign matters into the
product may also result in malfunctions. If liquids or foreign matters enter the product, do not use
the product, and contact Nikon.
3.
Weak electromagnetic waves
The product emits weak electromagnetic waves. Do not install the product near precision
electronic devices to avoid affecting their performance. If signal reception by a TV or radio is
affected, move the TV or radio set away from the product.
4.
Cautions on moving the product
•
When carrying the product, hold the product firmly by the bottom front recess and the bottom
rear.
•
When moving the product, do not hold by the focusing knobs, eyepiece tube, stage, or dia
pillar illuminator. The parts may become detached and cause the product to fall, and may also
result in malfunctions and loss of precision.
5.
Cautions on assembling the product
•
Take care to avoid pinching your fingers and hands.
•
Scratches and dirt (i.e. fingerprints) on optical components such as lenses and filters will
degrade the microscope image. When assembling the product, be careful not to scratch or
directly touch the optical components.
6.
Cautions on the protruding rack of the rectangular stage
The stage rack of TI-SR Rectangular Mechanical Stage will protrude when the stage is operated.
When operating the focus knobs or the nosepiece, be careful not to strike your hands against the
rack. Contact with the edges of the rack may result in injury.
7.
Disposal
To avoid biohazard risks, dispose of the product as contaminated equipment, according to the
standard procedures for your facility.
Safety Precautions
6