- ページ 15

計測機器 Nikon 50iのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Nikon 50i 40 ページ。 Clinical & laboratory microscopes
Nikon 50i にも：仕様 (2 ページ), 取扱説明書 (24 ページ)

Measurement

Caution — Controls, adjustments or usage of procedures other than those specified herein may produce

negative effects or damage to your health due to laser radiation.

• Before measuring, confirm each menu setting by referring to "Changing the measurement display mode"

and "Changing the distance display unit".

If the internal display is difficult to see, adjust the focus with the following

procedure.

1. Press the PWR button to turn on the power.

2. Look through the eyepiece and rotate the diopter adjustment ring until the

internal display comes into focus.

1. Press the PWR button to turn on the power.

• If you do not operate the button for about 8

seconds, the power turns off automatically.

Immediately after power-on

3. Press the PWR button to measure.

After measurement, the result is displayed for approx. 8 seconds, then power automatically turns off.

Press the PWR button while the power is on to measure again.

2. Aim at the target.

Position the center of the target mark on the

target.

Diopter adjustment ring

Target mark