ページを印刷する
Cautions before use
SAFETY PRECAUTIONS
CARE AND MAINTENANCE
En
Cautions
Lenses
Es
• The Nikon Laser Rangefinder is not
• When removing dust on the lens
Fr
designed for use underwater.
surface, use a soft oil-free brush.
Pt
• Rain, water, sand and mud should
• When removing stains or smudges
be removed from the rangefinder
like fingerprints from the lens
body surface as soon as possible,
surface, wipe the lenses very gently
using a soft, clean cloth.
with a soft clean cotton cloth or
• Do not leave the Nikon Laser
quality oil-free lens tissue. Use a
Rangefinder in a car on a hot or
small quantity of pure alcohol (not
sunny day, or near heat-generating
denatured) to wipe stubborn
equipment. This may damage or
smudges. Do not use velvet cloth or
negatively affect it.
ordinary tissue, as it may scratch the
• Do not leave the Nikon Laser
lens surface. Once the cloth has
Rangefinder in direct sunlight.
been used for cleaning the body, it
Ultraviolet rays and excessive heat
should not be used again for the
may negatively affect or even
lens surface.
damage the unit.
• If the Nikon Laser Rangefinder is
Main body
exposed to sudden changes in
• Clean the body surface with a soft,
temperature, water condensation
clean cloth after blowing away dust
may occur on lens surfaces. Do
with a blower* lightly. Do not use
not use the product until the
benzene, thinner, or other cleaners
condensation has evaporated.
containing organic solvents.
* A blower is rubber cleaning
equipment that blows air from a
nozzle.
8
Storage
• Water condensation or mold may
occur on the lens surface because of
high humidity. Therefore, store the
Nikon Laser Rangefinder in a cool,
dry place.
After use on a rainy day or at night,
thoroughly dry it at room
temperature, then store in a cool,
dry place.
Key Features
• Measurement range: 5-500 meters/6-550 yards
• High-quality 6x finder with multilayer coating
• Distant Target Priority mode is employed
• Sustained pressing of the POWER ON/Measurement
button activates continuous measurement function
• Automatic power shut-off (after approx. 8 sec.
unoperated)
• Default to "Last Use" settings
• Rainproof — JIS/IEC protection class 4 (IPX4)
equivalent (under our testing condtions)
• Invisible/Eyesafe EN/IEC Class 1M Laser
The Nikon Laser Rangefinder uses an invisible
laser beam for measuring. It measures the time the
laser beam takes to travel from the rangefinder
to the target and back. Laser reflectivity and
measurement results may vary according to climatic
and environmental conditions, as well as the color,
surface finish, size, shape and other characteristics
of the target.
The following conditions makes measuring easier:
• Cloudy weather
• Bright-colored target
• Target with highly reflective surface
• Large-size target
• When laser incident angle to the target is close to 90
degrees
Measurement may result in inaccuracy or failure in
the following cases:
• Target has small or slender reflective surface
• Target has diffusing reflective surface
• Target does not reflect the laser beam to the
rangefinder
• Target has totally reflective surface (glass, mirror,
etc.)
• Black target
• Target has stepped surface
• In snow, rain or fog
• Target measured through glass
• Reflective surface measured from diagonal direction
• Moving or vibrating target
• Obstacle cutting across in front of the target
• When measuring the surface of water
En
Es
Fr
Pt
9