- ページ 13

計測機器 Nikon Black Range X 4KのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Nikon Black Range X 4K 44 ページ。

Navigating the menus

• Operating the MODE button

There are two ways to press the MODE button. Operate the button while following the descriptions in this manual.

- "Press and hold" means to continue pressing the button for 1.5 seconds or longer.

- "Press" means to press the button quickly (less than 1.5 seconds).

Changing the internal display luminance (IL)

Adjust the brightness of the internal display. The factory default setting is IL A (Auto, automatic

brightness control). You can select IL A, or IL 1 to IL 5.

• IL A (Auto): The luminance is adjusted automatically according to the brightness

of the surroundings.

• IL 1 - IL 5: IL 1 is the darkest, while IL 5 is the brightest.

1. Press the PWR button to turn on the Laser Rangefinder.

2. Press and hold the MODE button.

• You can now change the internal display luminance.

3. The setting switches every time you press the PWR button.

IL A

• If you press and hold the MODE button or do not operate the buttons for about 8 seconds, the

displayed setting is saved and the Laser Rangefinder returns to standby.

• The setting is saved even when the Laser Rangefinder is turned OFF.

l Temporarily changing the internal display luminance setting

If the internal display is difficult to see due to the surrounding conditions, you can temporarily change

the brightness. The luminance changes every time you press the MODE button.

• The luminance level is not displayed in the internal display.

• IL A cannot be set.

• When the Laser Rangefinder is turned OFF, the internal display returns to the original luminance.

IL 1

IL 2

IL 3

IL 4

IL 5