- ページ 8

掃除機 Dirt Devil Vacuum CleanerのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Dirt Devil Vacuum Cleaner 8 ページ。 Vacuum cleaner dirt devil
Dirt Devil Vacuum Cleaner にも：オーナーズマニュアル (10 ページ), オーナーズマニュアル (8 ページ), オーナーズマニュアル (18 ページ), オーナーズマニュアル (18 ページ), オーナーズマニュアル (18 ページ), オーナーズマニュアル (18 ページ), オーナーズマニュアル (14 ページ)

ページを印刷する

TOOL REQUIRED: FLATHEAD SCREWDRIVER

WARNING: TO REDUCE THE RlSK OF INJURY FROM MOVING PARTS

UNPLUG CLEANER BEFORE REMOVING OR REPLACING LIGHTBULB.

Lean cleaner handle back.

Pull bulb out of socket to

Insert end of a standard (flat

remove. Do not twist. Push

head) screwdriver into side

bulb into socket to replace.

slot and ply outward to pop

Snap headlight lens panel

headlight lens out.

back into place.

T h i s cleaner uses a common automotive lamp #906, 13.0 volts. For bulb

replacement, call 1-800-321-1134 or your local auto parts store.

WARNING: TO

Problem

Cleaner won't run

Cleaner won't pick-up

or low suction

Dust escaping from cleaner

Cleaner tools won't pick up

Headlight not working

Cleaner is difficult to push

[EDUCE RlSK OF PERSONAL INJURY

UNPLUG CLEANER BEFORE SERVICING

Possible Reasons

1. Power cord not firmly plugged into outlet.

2. Blown fuse or tripped breaker.

3. Needs service.

1. CarpeVHose Selector on wrong setting.

2. Dirt container not installed correctly.

3. Dirt container full.

4. Blushroll wom.

5. Broken or worn belt.

6. Clogged PERMA FILTER

7. Nonleldirt passage hose clogged.

8. Carpet height setting is incorrect.

9. Hose inlet clogged.

1. Dirt container full.

2. Dirt container not installed correctly.

3. Hose not installed correctly.

1. CarpetIHose Selector on wrong setting.

2. Hose clogged.

3. Hose inlet clogged.

4. Dirt container full.

5. Clogged PERMA FILTER

1. Bulb burnt out.

2. Loose electrical wires.

1. Carpet height setting is incorrect.

Possible Solutions

1. Plug cord in firmly.

2. Check fuse or breaker in your home. Replace

fuseireset breaker.

3. Take to service center or call 1-800-321-1 134.

1. Select proper setting carpethose

Pg. 5.

Review

dirt

container removal

a r i d

repkcwnent

Pg. 6.

Empty dirt container

Pg. 6.

Replace brushroll

Pg. 7.

Replace belt

Pg. 7.

6. Remove PERMA FILTERQ and clean

Pg. 6.

7. Remove base n o d e cover; remove obstruction

OR Remove hose; remove obsbuction.

8. Set carpet height adjustment to appmpriate

setting for carpet being cleaned

Pg. 5.

Remove hose and clean inlet.

Empty dirt container

Pg. 6.

Review dirt container m v a l

and

replacement

Pg. 6.

Review hose installation

Pg. 5.

1. Select proper setting carpethose

Pg. 5.

2. Remove hose and tools; remove obshdion

Pg. 5.

Remove hose and clean inlet.

Empty dirt container

Pg. 6.

5. Remove PERMA FILTER and clean

Pg. 7.

1. Replace bulb

Pg. 8.

2. Call I

800-321 -1 134 for nearest authorized

RoyalQ Dealer.

1. Set carpet height adjustment to appmpriate

setting for carpet being cleaned

Pg. 5.

ANY OTHER SERVICING SHOULD BE DONE BY AN AUTHORIZED SERVICE REPRESENTATIVE

CUSTOMER SERVICE

(1-800-321 -11 34)

In the event that further assistance is required, see your Yellow Pages for an author~zed Royal

Dealer. Costs of any transportation

to and from any place of repair are to be paid by the owner. The service parts used in this unit are easily replaced and readi

ly avail-

able from an authorized Royal

Dealer or retailer. Always identify your cleaner by the model number and manufacturing code when

requesting information or ordering replacement parts. (The model number appears on the back of the cleaner.)