- ページ 11

水ポンプ Dirty Hand Tools 101100のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Dirty Hand Tools 101100 20 ページ。 2” diameter semi-trash pump 7hp/208cc engine

DISCHARGE

HOSE

Semi-Trash Pump Location & Setup

Locate the semi-trash pump on a flat, level, sturdy surface capable

of supporting the weight of the pump.

1. For best results place the pump near water level and use hoses

that are no longer than necessary. This allows the pump to

produce the greatest output with the least self-priming time.

As pumping height increases, pump output decreases. The length,

type, and size of the suction and discharge hoses can affect

pump output. Discharge capability is always greater than suction

capability. The pumping height for the intake hose should be less

than the pumping height for the discharge hose.

2. The intake hose with intake strainer should be fully immersed.

Do not operate pump without strainer connected. Keep strainer

Discharge

out of sand or silt by placing strainer in a bucket or on stones.

Pumping

Height

INTAKE

HOSE

3. Secure the intake hose and the discharge hose to keep them

from moving once the pump is turned on. The intake hose

and the discharge hose should be as short as possible for more

efficient operation.

INTAKE

STRAINER

Intake

Pumping

Height