- ページ 13

ボイラー用品 Aerco 89030のPDF 技術指導をオンラインで閲覧またはダウンロードできます。Aerco 89030 14 ページ。 Condensate neutralization tank

Condensate Neutralization Tank User Instructions

OPERATION

The appliance condensate will flow through the neutralizing media, raising the condensate pH to

a level that will help prevent corrosion of the domestic drain and the public sewer system.

Monitor the level of the neutralization media in the tank periodically. The pH can be checked after

the condensate has exited the tank or by removing the lid and taking a sample from the last

chamber before the outlet. Check the pH level every three months for the first year. Use a suitable

pH test strip paper or an electronic pH meter for precise measurement. The frequency of checking

the pH level can be reduced to every six months or every year depending on the readings obtained

compared to local water authority requirements. The neutralizing media should be replaced when

the pH level drops below the minimum level of the local water authority. For replacement media

contact your local AERCO sales representative.

•

Replacement neutralization media for KC, BMK, INN, Recon, MFC, and Modulex series

models is P/N 89031.

•

Replacement neutralization media for AM Series models is P/N 62801022.

At delivery, the replacement media comes in two clear plastic bags; a smaller one inside the

bigger (Figure 10). The larger bag consists of larger pieces of neutralization material, while the

smaller bag consists of smaller pellets of neutralization material. Replenish the tank with the larger

material, then sprinkle the smaller pellets on top.

Figure 10: Condensate Neutralization Tank Replacement Media (In Bags)

The unit is warranted against defects in materials and workmanship for one year.

•

TID-0074_0H

8/22/2022

Bag Containing

Larger Pieces

of Media

Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST

Bag Inside

Containing

Smaller Pieces

of Media

Inside

Page 13 of 14