- ページ 4

ディスク・デュプリケーター Disc Makers ReflexFlash11のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Disc Makers ReflexFlash11 13 ページ。 High-speed usb duplicator

ページを印刷する

IV.

Menu Overview

FUncTIon

1. copy

2. compare

3. copy+compare

4. Information

4.1 USB/SD Info

4.2 System Info

5. Utility

5.1 Quick Erase USB/SD

5.2 Full Erase USB/SD

5.3 System Update

6. Setup

6.1 Start-up Menu

6.2 Analyze Source

6.3 Button Beep

6.4 Asyn Hold Time

6.5 Ignore Size

6.6 Asynchronous

6.7 Language

User Guide 1.0

ReflexFlash

DEScRIPTIon

Copies USB Cards or USB Drives. All contents of the

source drive will be duplicated to all target card(s)/drive(s)

Performs a bit-for-bit comparison between the source

drive and copied card(s) / drive(s)

Copies the source drive, and then immediately follows with a bit-

for-bit comparison between the source and copied card(s) / drive(s)

to ensure exact duplication

Shows the basic information on the USB card(s) / USB Drive(s)

inserted, such as flash type, content size, and available space

Shows information of the duplicator system, such as controller model

number, system memory capacity, and software version

Erases the index of USB Drive in the writer tray

Completely erases all data of USB Drive in the writer tray.

This process takes longer than Quick Erase

Updates the firmware version in the system

Allows user to select which function is shown first when the

duplicator powers on

Enabled (ON) to copy data only. Disabled (OFF) to copy the entire

USB Drive

Turns audio signal on or off when a button is pressed

Sets the time the system waits to continue duplication jobs in

Asynchronous mode before exiting

Allows user to set the tolerance of capacity difference between the

source and the target

Allows user to enable or disable Asynchronous copy mode

Sets system language interface.