- ページ 7

ディスク・デュプリケーター Disc Makers ReflexFlash11のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Disc Makers ReflexFlash11 13 ページ。 High-speed usb duplicator

4. The duplicator will immediately begin executing the function as each target drive is inserted.

Pass: 0

Fail: 0

5. During the process, each slot's green LED will blink continuously. CAUTION: Do NOT take

out the drive while the system is busy. Once the process is completed, the green LED light

will become steady. Once the LED light comes to a constant steady green the drive may be

removed and another inserted to continue the job.

6. The number of successful copies will be accumulated and displayed on the LCD along with

the number of failed copies and jobs still in progress.

Pass: 5

Working:

Note: In Asynchronous mode, user may press the UP and DOWN buttons

to check the status and progress of each drive.

2. Other Functions



Information

1. USB Info (Menu Function 4.1) displays information about each drive inserted into the

duplicator, including flash device type, file system format, content size, and available space.

Press UP or DOWN buttons to select and view each tray. Press ESC to exit.

[01]

FAT16

2. System Info (Menu Function 4.2) displays information about the duplicator, including

controller model number, system memory capacity, and firmware version. Press ENT

to view System Info and press ESC to exit.

SD7007

User Guide 1.0

ReflexFlash

Working

SD 982M

209M

256M

www.discmakers.com/techsupport

Start copying as each target drive is inserted

Number of copies that are completed successfully

Number of copies still in progress

Number of failed copies

Flash device type and capacity

Available space on the device

Tray number and file system format

System memory

Model number and current firmware version