- ページ 8

ディスク・デュプリケーター Disc Makers ReflexMax1のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Disc Makers ReflexMax1 9 ページ。 Cd reflexmax series
Disc Makers ReflexMax1 にも：クイック・スタート・マニュアル (1 ページ), クイック・スタート・マニュアル (2 ページ), ユーザーマニュアル (13 ページ)

ページを印刷する

5. After selecting a track to copy, press the UP arrow until End appears. In this

example, one track is selected and the time for this track is 2:41. If four

tracks were selected, the screen would show 4 Trk and give the total time for

all four tracks.

Select Track:

End

6. Press the ENT button and the Reflex 1 will ask if all the selections are made

for this CD. Use the UP or DOWN arrow to change between Yes and No.

Pressing ENT with No on the LCD will take the user back to Select Track.

Pressing ENT with Yes on the screen will start the copying of the track (or

tracks) to the blank target CD.

End edit disc

and burn?

7. When the copying is complete the unit will display Burn Complete! OK: 01.

Press the ENT button. The LCD will display Continue edit next Disc? NO. To

change to another CD, load the top drive (reader) with another master disc.

Press the UP arrow to change the No to Yes and press ENT. This will take you

to the screen from step 3. Repeat steps 3 through 6 to put additional tracks

on the blank target CD.

1-888-800-4041

1 Trk 02:41

YES

8. When there are no more tracks to write to the CD leave the Continue

edit next Disc? NO set to No and press the ENT key again. The following

screen will appear:

Press ENT and the ReflexMax1 will close the CD. Once the CD is closed, you

cannot copy any additional tracks to the disc.

Note: the Edit Track CD to CD Edit is the only function enabled for the Reflex 1 in

the Edit Track section.

11. S

ETUP

The Setup Function allows you to specify specific parameters for copying CDs.

There are 16 sub items. From the main menu screen pressing ENT will show

the sub heading. Pressing the UP and DOWN arrows allows the user to move

between the settings.

1. Language: allows the user to set English or Spanish as the display language.

2. Burn Speed: allows the user to change the speed at which the unit burns a

CD. By pressing the ENT button the current setting will be displayed. The

user can then press the UP and DOWN arrows to change to the desired

speed. Pressing the ENT button will set the speed. Press ESC to go back to

the main menu.

3. Read Speed: allows the user to change the speed at which the unit reads a

master CD. By pressing the ENT button the current setting will be displayed.

The user can then press the UP and DOWN arrows to change to the desired

speed. Pressing the ENT button will set the speed. Press ESC to go back to

the main menu.

4. Auto Start Drive set to On will start a copy function as soon as blank media

is detected in the writer drive. The default setting is Off.

5. Startup Menu allows the user to have the ReflexMax1 start up to any of the

first seven options in the main menu.The default setting is Copy.

www.discmakers.com

Close all discs

session?

YES